Filter
Top Products
15
EN
ENGLISH
Connecting the speakers
Setting up the system
• To make sure that each speaker has been connected properly, pay attention to the test tone from each speaker.
Refer to “5
Adjust the speaker volume level
.”. )
• This model is designed on the assumption that a pair of Surround Back Speakers is connected.
When use only one Surround Back Speaker, connect it with either speaker terminal of “SURROUND BACK L” or “SURROUND BACK R” and
increase the volume level of the test tone by 3 dB for the channel which has been connected. )
In this case, when “Dolby PRO LOGICIIx” is selected at LISTEN MODE, sound is output at the connected channel only.
++
--
FRONT B
RL
SUB
WOOFER
CENTER
GRAY
SURROUND
R
L
-
+
-
+
-
+
-
+
BLUE
TAN
R
L
BROWN
GREENWHITERED
RLCENTERFRONT A
-
+
SURROUND
BACK
Right
Front Speakers B
Left
Right
Powered
Subwoofer
Left
Center
Speaker
Right
Left
Front Speakers A
Surround Speakers
Surround Back Speakers
RightLeft
04.6.16, 3:51 PM15