Kenwood KRF-X9080D Stereo System User Manual


 
21
EN
ENGLISH
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or Multi (%/)keys
while test tone is being output until clip sound is heard from
the Subwoofer or Front Speaker.
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
4 Press the SETUP key to accept the setting.
7
Input the distance to the speakers.
Indicators appear only for the channels of the speakers selected
in step 4.
1 Press the
/
keys or @/# keys to select the SP DISTANCE
on setup displays and press the SETUP key again.
2 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L) : ____ feet (meters)
Distance to Center Speaker (C) : ____ feet (meters)
Distance to Front Right Speaker (R) : ____ feet (meters)
Distance to Surround Right Speaker (SR)
: ____ feet (meters)
Distance to Surround Back Right Speaker(SBR)
: ____ feet (meters)
Distance to Surround Back Left Speaker (SBL)
: ____ feet (meters)
Distance to Surround Left Speaker (SL)
: ____ feet (meters)
Distance to Subwoofer (SW) : ____ feet (meters)
3 Use the
/
keys or @/# keys to select the speakers and the
MULTI CONTROL knob or Multi (%/) keys to adjust the
distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
L
SL S SB SR
C R
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
LOUDNESS
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeat steps 3 to input the distance for each of the speakers.
5 Press the SETUP key again to return to main setup displays.
The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
8
Adjust the LFE LEVEL (Low Frequency Effects).
1 Press the
/
keys
or
@/# keys to select the LFE LEVEL and
press the SETUP key.
2 Use the MULTI CONTROL knob or Multi (%/) keys to adjust
the LFE LEVEL.
L
SL S SB SR
R
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
PRO LOGIC
3 Press the SETUP key again to return to main setup displays.
Preparing for surround sound
Indication in feet Indication in meters
9
Select the display mode.
1 Press the
/
keys
or
@/# keys to select the DISP MODE.
2 Press the SETUP key for the following displays:
1 DISP SELECTOR : Displays the current input selector.
2 DISP LISTEN : Displays the current listen mode.
3 Use the MULTI CONTROL knob or Multi (%/) keys to select
the display mode.
SL S SB SR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
PRO LOGIC
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
LR
DOLBY DIGITAL
4 Press the SETUP key again to accept the setting.
5 Use the
key or # key to select EXIT.
LR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
NEO:6
CSII
AB CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
SL S SB SR
PRO LOGIC
6 Press the SETUP key to exit the SETUP mode.
04.6.16, 3:54 PM21