52
KRF-V9300D/KRF-V8300D/KRF-V7300D
Surround effects
Dolby Digital, Dolby Digital EX, Dolby Digital Plus and Dolby TrueHD source
Connected audio input jack HDMI, OPTICAL, COAXIAL HDMI
Dolby Digital /
Dolby Digital EX
Dolby Digital Plus Dolby TrueHD (96kHz and lower)
Dolby TrueHD
(176.4kHz/ 192kHz)
*
/2
2ch Others
*
/2
*
/3
*
/4
2ch Others
*
/2
*
/3
*
/4
2ch Others
Dolby Digital
Dolby Digital + Pro Logic IIx Movie*
1
Dolby Digital + Pro Logic IIx Music*
3
Dolby Digital EX*
3
Dolby Digital Plus
Dolby Digital Plus + Pro Logic IIx
Movie*
1
Dolby Digital Plus + Pro Logic IIx
Music*
3
Dolby Digital Plus + Dolby EX*
3
Dolby TrueHD
Dolby TrueHD + Pro Logic IIx
Movie*
1
Dolby TrueHD + Pro Logic IIx Music*
3
Dolby TrueHD + Dolby EX*
3
Pro Logic IIx Movie/
Pro Logic II Movie*
2
Pro Logic IIx Music/
Pro Logic II Music*
2
Pro Logic IIx Game/
Pro Logic II Game*
2
Pro Logic
Stereo
Input signal
Listen mode
*
1
Can be selected only when both the surround back left and right speakers are connected (7.1-channels).
*
2
Pro Logic II is selected if no surround back speakers are connected.
*
3
Can be selected when one or more surround back speakers are connected.
• Certain listen modes may not be selected depending on the input signal type and speaker setup.
• If the surround effect cannot be obtained or the desirable listen mode cannot be selected, check the following setups.
− Speaker setup
− Input mode setup
− Audio setup of the player component
• When a digital signal with a number of channels exceeding the current speaker setup is input, the input signal is downmixed automatically
according to the current speaker setup.
Note on input signals
"
*
/2" or "
*
/3", etc, in the table under <Input signals and corresponding listen modes> indicate the channels encoded in the input signal.
When an encoded signal is input, the input channel indicators on the display panel light as follows.
*
/2 : , , , ,
or
, , ,
*
/3 : , , , , ,
or
, , , ,
*
/4 : , , , , , ,
or
, , , , ,
2ch : ,
Others : Dual Mono ( , ), 3/0 ( , , ), 3/1 ( , , , )
• For "LFE" and "S" input channel indicators, see <About indicators> p.
Input signals and corresponding listen modes