Kenwood KRF-V8300D Stereo Receiver User Manual


 
English
41
Setup
Audio OutAudio Out
This function selects whether the output destination of the audio
input is the TV or this unit.
1 Select "Audio Out" in <HDMI setup –"HDMI Setup"–
> .
2 Set the HDMI audio output destination.
[MULTI CONTROL /5]
[ENTER]
Display Setting
"AUDIO OUT AMP" Outputs the audio from the speakers connected to this unit.
"AUDIO OUT TV" Outputs the audio from the TV connected to this unit.
Audio Out can be set when TV Control is set to off.
If "AUDIO OUT TV" is selected and the audio is not output or
is interfered with by noise, set the audio output of the player
component to PCM.
If "AUDIO OUT TV" is selected, adjust the volume on TV.
Audio Delay (Lip Sync)Audio Delay (Lip Sync)
If the monitored video is delayed in time with respect to the
audio from the speakers, the audio output timing can be delayed.
1 Select "Audio Delay" in <HDMI setup –"HDMI
Setup"–> .
2 Set the HDMI audio delay.
[MULTI CONTROL /5]
[ENTER]
Display Setting
"DELAY Auto"
Corrects the deviation in time between the output audio and
video automatically.
"DELAY Manual"
Allows the user to correct the deviation in time between the
output audio and video manually.
"DELAY Off"
The deviation in time between the output audio and video is
not corrected.
When "DELAY Manual" is selected, use [MULTI
CONTROL /5] to select the audio delay time and
press [ENTER] to enter the setting.
The delay time is adjusted from 0ms to 300ms in 10ms step.
If the TV in use is not compatible with "DELAY Auto", select "DELAY
Manual".
HDMI LinkHDMI Link
This function selects whether or not the volume control and
input selection of this unit are interlocked with the operations of
the connected components.
1 Select "HDMI Link" in <HDMI setup –"HDMI
Setup"–> .
2 Set the HDMI link on or off.
[MULTI CONTROL /5]
[ENTER]
Display Setting
"HDMI LINK On" The HDMI control functions are used.
"HDMI LINK Off" The HDMI control functions are not used.
When "HDMI LINK On" is selected, the HDMI indicator on
the front panel lights blue.
If "HDMI LINK On" is set, proceed to the <Power
Control> setup.
Power ControlPower Control
This function selects whether or not the power status of this unit
is interlocked with the power ON/OFF and start of playback of the
connected components.
1 Set the HDMI power control on or off.
[MULTI CONTROL /5]
[ENTER]
Display Setting
"POWER CTRL On"
Turning the TV ON/OFF also turns this unit ON/OFF with an
interlocked operation.
"POWER CTRL Off"
The power ON/OFF status of this unit is not interlocked with the
power ON/OFF status of the TV.
If "POWER CTRL On" is set, proceed to the <TV
Control> setup.