Filter
Top Products
19
Operations
KRF-V8010D (En/T)
Each press switches the display mode as follows:
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
Using the DISPLAY key
1 PS (Program Service name) display:
The station name is displayed automatically when an RDS broad-
cast is received.
If no PS data was sent, “NO PS” is displayed.
Pressing the DISPLAY key changes the contents of the
display.
2 RT (Radio Text) display:
Text data accompanying the RDS broadcast scrolls across the
display. The indication “RT----” appears in the display when receiv-
ing a RDS station, and “NO RT” when receiving a non-RDS station.
DISPLAY
3 Frequency display:
Displays the frequency of the current station.
1
2
3
This function automatically stores up to 30 RDS stations in the preset
memory. In order to use the EON and PTY functions, the RDS stations
must be stored in the preset memory using the RDS AUTO MEMORY
function.
Use the input selector to select the tuner.
Use the BAND key to set the broadcast band to “FM”.
Press and hold the MEMORY key for more than 2 seconds.
Presetting RDS stations
(RDS AUTO MEMORY)
• After a few minutes, up to 30 RDS stations are preset in order from
channel "01".This operation may take some time depending on the
area where you live.
•Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function finds 15
RDS stations, the stations currently preset at numbers 01~15 are
replaced by the RDS stations.)
INPUT SELECTOR
BAND
MEMORY
Presetting radio stations manually
•Repeat steps 1, 2, 3 and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
Blinks for 5 seconds Lights for 5 seconds
1
2
Tune to the station you want to store.
3
4
Use the MULTI CONTROL to select one of the station
presets (1 – 30).
Press the MEMORY key to accept the setting.
)
1 8 ))9
.
FM
MHz
STEREO
A
SP
TUNED
MEMO.
AUTO
ST.
SW
R
L
B
BC 1 FM
FM
AM
kHz
MHz
STEREO
DSP
S.DIRECT
A
SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R
L
DIGITAL
B
TI.VOL
RDS
EON PTY
TP TA NEWS
A
BCDE GHF
FM
AM
kHz
MHz
STEREO
DSP
S.DIRECT
A
SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R
L
DIGITAL
B
TI.VOL
RDS
EON PTY
TP TA NEWS
-
- 1) 5)2
.
FM
AM
kHz
MHz
STEREO
DSP
S.DIRECT
A
SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R
L
DIGITAL
B
TI.VOL
RDS
EON PTY
TP TA NEWS
A
UTO
FM
AM
kHz
MHz
STEREO
DSP
S.DIRECT
A
SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
S
W
R
L
DIGITAL
B
TI.VOL
RDS
EON PTY
TP TA NEWS
M
EMOR Y
FM
AM
kHz
MHz
STEREO
DSP
S.DIRECT
A
SP
MUTE
DOWNMIX
MONITOR
PRO LOGIC
TUNED
MEMO.
AUTO
ST.
AUTO SOUND
SW
R
L
DIGITAL
B
TI.VOL
RDS
EON PTY
TP TA NEWS
Listening to radio broadcasts
MEMORY
MULTI CONTROL
The RDS auto memory function assigns preset numbers to RDS
stations starting from preset number "1". Therefore, be sure to execute
the RDS auto memory function before using the following operations to
manually store AM stations and other FM stations, and RDS stations.
“Presetting RDS stations (RDS AUTO MEMORY)”. (
•When storing radio stations manually, it may take a few seconds
before the "MEMORY" indicator appears in the display after press-
ing the MEMORY key depending on receiving conditions.