Kenwood KRF-V6300D Stereo Receiver User Manual


 
English
47
Specifications
AUDIO section
Rated output power during STEREO operation
(63 Hz – 12.5 kHz, 0.7% T.H.D., at 6 Ω) .............100 W + 100 W
Effective output power during STEREO operation
RMS (1 kHz, 10% T.H.D., at 6 Ω) ......................... 130 W + 130 W
Effective power output during SURROUND operation
FRONT
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) .. 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ... 130 W + 130 W
CENTER
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven) ..............100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven) ...............130 W
SURROUND
(1 kHz, 0.7 % T.H.D. at 6 Ω one channel driven)
... 100 W + 100 W
(1 kHz, 10 % T.H.D. at 6 Ω one channel driven)
.... 130 W + 130 W
Total harmonic distortion ....................0.05 % (1 kHz, 50 W, 6 Ω)
Frequency response (IHF’66)
CD/DVD .....................................10 Hz – 70 kHz, +0 dB – –3.0 dB
Signal to noise ratio (IHF’66)
CD/DVD ..............................................................................100 dB
Input sensitivity / impedance
CD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 68 kΩ
AV AUX ................................................................ 550 mV / 33 kΩ
DVD/6CH ............................................................ 550 mV / 18 kΩ
Output level / impedance
REC OUT (MD/TAPE, VIDEO 1) ........................... 550 mV / 470 Ω
PRE OUT (SURROUND BACK) ............................ 650 mV / 470 Ω
PRE OUT (SUBWOOFER) .........................................2.0 V / 470 Ω
Tone control
BASS ...............................................................±10 dB (at 100 Hz)
TREBLE ...........................................................±10 dB (at 10 kHz)
DIGITAL AUDIO section
Input terminal
Optical .......................................................... CD/DVD, VIDEO 2
Coaxial .......................................................................DVD/6CH
VIDEO section
VIDEO input sensitivity / impedance
(VIDEO 1, VIDEO 2, DVD/6CH, AV AUX)
Composite ............................................................1 Vp-p / 75 Ω
VIDEO output level / impedance (VIDEO 1, MONITOR)
Composite ............................................................1 Vp-p / 75 Ω
S-VIDEO input sensitivity / impedance (VIDEO 2, DVD/6CH)
Y-singal .................................................................1 Vp-p / 75 Ω
C-singal ......................................................... 0.286 Vp-p / 75 Ω
S-VIDEO output level / impedance (MONITOR)
Y-singal .................................................................1 Vp-p / 75 Ω
C-singal ......................................................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO input sensitivity / impedance
(VIDEO 1, VIDEO 2, DVD/6CH)
Y-signal .................................................................1 Vp-p / 75 Ω
CB/ CR-signal .....................................................0.7 Vp-p / 75 Ω
COMPONENT VIDEO output level / impedance (MONITOR)
Y-signal .................................................................1 Vp-p / 75 Ω
CB/ CR-signal .....................................................0.7 Vp-p / 75 Ω
HDMI section
HDMI input terminal .....................................DVD/6CH, VIDEO 2
HDMI output terminal ..................................................MONITOR
FM tuner section
Tuning frequency range ..........................87.5 MHz – 108.0 MHz
AM tuner section
Tuning frequency range ............................. 531 kHz – 1,602 kHz
General
Power consumption ...........................................................245 W
Standby power consumption .............................less than 0.7 W
Dimensions ...............................................W: 440 mm (17-5/16")
....................................................................H: 159 mm (6-1/4")
................................................................. D: 372 mm (14-5/8")
Weight (net) ......................................................... 9.3 kg (20.5 lb)
1. Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
2. The full performance may not be exhibited in an extremely cold
location (under a water-freezing temperature).