Kenwood KRF-V6300D Stereo Receiver User Manual


 
English
39
Adjusting the sound
TONE
BASS BOOST
MULTI CONTROL
O/
ACTIVE EQ
MULTI CONTROL ACTIVE EQ
Adjusting the ToneAdjusting the Tone
Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".
œ Press [TONE] to select the Tone mode.
Use [MULTI CONTROL /5] to select "TONE ON" or
"TONE OFF".
é When in "TONE ON" selection, press [TONE] for the
following displays.
Display Setting Range
"BASS" Adjusts low frequency range. -10 – +10 (in 2 step)
"TREB" Adjusts high frequency range. -10 – +10 (in 2 step)
® Use [MULTI CONTROL /5] to adjust the sound
quality.
Press [TONE].
When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the TONE setting.
Bass BoostBass Boost
Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo".
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Bass Boost does not function when this unit is in the sound
quality or ambience effects adjustment mode.
When the ACTIVE EQ mode is set to ON, set it to OFF and then
control the Bass Boost setting.
ACTIVE EQ modeACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in
PCM and analog stereo mode.
Press [ACTIVE EQ] for the following selections.
Display Setting
"ACTIVE EQ MUSIC" Effective when listening to music.
"ACTIVE EQ CINEMA" Effective when watching a movie.
"ACTIVE EQ GAME" Effective when playing a game.
"ACTIVE EQ OFF" Active EQ function is off.
ACTIVE EQ indicator lights up.
ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON.