Filter
Top Products
6
|
KIV-BT901/ KIV-701
iPod/iPhone Operation
iPod
IN
SRC
4
MENU
¢38
SEARCH MODE
SCRL
DISP
iPod
KIV-701
Basic Operation
Playing iPod
• Connect an iPod
When connected, the source is switched
automatically and a song starts playing.
• Select iPod source
Press the [SRC] button repeatedly also
switches source.
Select the “
iPod” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Song Select
Press the [4] or [¢] button.
✍ This unit cannot be operated for a few seconds
while reading Artwork after selecting a song.
Fast Forwards or Fast Backwards
Hold down the [4] or [¢] button.
Pause and Play
Press the [38] button to pause or resume
playback.
Remove iPod
Press the [38] button for at least 2 seconds.
The unit enters the USB REMOVE mode (“USB
REMOVE” is displayed), and the iPod can be
removed safely.
iPod control by Hand mode
KIV-701
Press the [iPod] button.
When set to “ON”, allows you to operate iPod with
the control on the iPod.
KIV-BT901
The setting of “iPod By Hand Mode” in <Play Mode>
(page 8).
USB Device select
iPod may not be recognized when USB HUB is used.
Switch to the device to be connected.
1. Enter Menu List mode
Press the [MENU] button.
2. Turn the [Volume] knob and press it when
the desired item is displayed.
Select “Port Up”.
Repeat these steps to switch to the device to
be connected.
⁄
• For more details on USB HUB, see <About USB hub>
(page 71).
Switching display
Press the [DISP] button to select display mode.
Selects the Artwork small, Artwork large, Video or
Clock.
✍ The Video mode is displayed only when you
have applied the parking brake.
Display example of Artwork small mode
1
2
3
4
5
1 Song information (see <Customization of
Display> (page 40))
2 Play time and play time bar
3 Browse item
4 Album art
5 Play mode indicator (see <Display Indicator
items> (page 76))
Volume
KCA-iP202 (optional
accessory) is required
to connect an iPod.
(Do not use extension
cables.)