Filter
Top Products
English
|
51
Car Type Fine Adjustments
Adjusting fine tuning of the speaker position
compensation value specified at <Car Type
Selection> (page 50).
Display Item Range
“Front” Front speaker 0 – 14.44 feet
“Rear” Rear speaker 0 – 14.44 feet
“SW” Subwoofer 0 – 14.44 feet
1
Select the source
Press the [SRC] button repeatedly also switches
source.
Select a source other than “ STANDBY”.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
2
Enter Audio Control mode
Press the [Volume] knob.
3
Enter Car Type Adjustment mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “Detailed Setup” > “Car Type Adjust”.
4
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
5
Make a setting
Turn the [Volume] knob to select a setting
value, and then press the [Volume] knob.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
Reference point
FRONT
FRONT
SUB-W
REAR
REAR
1.7 feet
4.9 feet
+0 feet
+3.2 feet
2.6 feet
+2.3 feet
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.