Filter
Top Products
54
|
KIV-BT901/ KIV-701
Bluetooth Setup
Function of KIV-BT901
Easy pairing function
1
Enter easy pairing mode
Press the [ ] button for at least 1 second.
Any of the following is displayed depending on
cell-phone registration condition:
– “Searching”: When registering a cell-phone for the
first time.
– “(cell-phone name)”: When a cell-phone has
already been registered.
– “Device Full”: When maximum of five cell-phones
have already been registered.
When registering a cell-phone for the first time
(Registering a cell-phone)
2
“Searching” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3
Select a cell-phone name
Turn the [Volume] knob and press it when the
desired item is displayed.
4
Input the PIN code
1. Turn the [Volume] knob and press it when
the desired item is displayed.
Select the digit.
2. Turn the [Volume] knob to select the
numbers, and then press the [Volume] knob.
5
Transmit the PIN code
Press the [Volume] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
When “Confirm Phone” is displayed, confirm
connection with a cell-phone operation.
6
The receiver is connected to a cell-phone, with
“HF Connect” displayed, and exits the easy
pairing mode.
When a cell-phone has already been registered,
or maximum of five cell-phones have already
been registered (Selecting a cell-phone)
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [Volume] knob.
✍ To register a new cell-phone, select “Device
Search”, then go to “When registering a cell-
phone for the first time.”
4
Set up the cell-phone name
Press the [Volume] knob.
“
(cell-phone name)” or “ (cell-phone name)” is
displayed.
“ ” (blue): The selected Bluetooth device is busy.
“ ” (gray): The selected Bluetooth device is on
standby.
“ ” (blank): The Bluetooth device is deselected.
✍ If a Bluetooth device is already selected, deselect
it, and then select a different one.
5
Exit easy pairing mode
Press the [ ] button.
Deleting the registered cell-phone
2
“(cell-phone name)” or “Device Full” is
displayed.
3
Select a cell-phone name
Turn the [Volume] knob.
4
Delete the selected cell-phone
Press the [Volume] knob for at least 2 seconds.
5
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “YES”.
“Delete” is displayed.
Bluetooth Setting
You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings”.
3
Select the setting item to adjust
Turn the [Volume] knob and press it when the
desired item is displayed.
Function of KIV-BT901
KIV-701 with KCA-BT300/BT200 (Optional Accessory)
SRC MENU
iPod
KIV-BT901
KIV-701
Volume