Filter
Top Products
English
|
31
Bluetooth Audio Operation
Connecting a Bluetooth Device
Before using the Bluetooth device, you need to
connect Bluetooth device to this unit.
Pairing (Registering from Bluetooth devices)
To make your Bluetooth Audio player usable with
this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
audio player (pairing). Select “KCA-BT300”/ “KCA-
BT200” from the list of connected units.
3
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
Code> (page 57).
4
By operating the Bluetooth device, start
Bluetooth connection.
⁄
• If pairing does not succeed, try followings.
– PIN code is set to “0000”. See <Registering PIN Code>
(page 57).
– Turn off the power of this unit and turn it back on. And
then try the pairing operation again.
– If other audio players have been registered, delete
them. And then try the pairing operation again. See
<Deleting a Registered Bluetooth Device> (page 58).
• When registering from this unit, refer to <Registering
Bluetooth Device (Pairing)> (page 56).
• For details on the Bluetooth Audio player which can be
connected, see <About the Bluetooth Audio player> in
the instruction manual of the Bluetooth Unit.
Function of KIV-701 with KCA-BT300/BT200 (Optional Accessory)
Basic Operation
Selecting Bluetooth Audio source
Press the [SRC] button repeatedly also switches
source.
Select the “ BT AUD EXT” display.
✍ SRC Select mode 2: Press the [SRC] button. Turn
the [Volume] knob and press it when the desired
item is displayed.
Pause and play
Press the [38] button.
Music Search
Press the [4] or [¢] button.
Switching display
Press the [DISP] button to select display mode.
Selects the Information or Clock.
Display example of information display mode
1
1 Song information*
1
(Only with KCA-BT300 (optional accessory)
connected)
⁄
• *
1
If the Bluetooth Audio player supports AVRCP1.3
profile, these items can be displayed.
• All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching between Bluetooth audio sources does
not start or stop playback automatically. Perform the
operation for starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
SRC
4
¢38
DISP
Volume