Filter
Top Products
5
EN
34 5 6 821
0
9
# !$@
7
1 ON/STANDBY key
Use to turn the power ON/STANDBY.
*
STANDBY indicator
Lights when the power is in the standby
mode.
2 DUAL SOURCE VOLUME 5/∞
keys
Use to adjust the volume in the DUAL
SOURCE mode. ¢
DUAL SOURCE INPUT key
Use to select the input for the DUAL
SOURCE mode. ¢
DUAL SOURCE ON/OFF key
Use to switch the DUAL SOURCE mode
ON/OFF. ¢
3 BAND key
Use to select the broadcast band.
¶ª
4 AUTO/MONO key
Use to select the auto or manual tuning
mode. ¶ª
5 Dolby D indicator
Lights when the receiver is in the Dolby
Digital mode. ›
DTS indicator
Lights when the receiver is in the
DTS mode. ›
Dolby H indicator
Lights when the Dolby Headphone mode
is ON. ‹
DUAL SRC indicator
Lights when the DUAL SOURCE mode
is ON. ¢
6 Joystick
MULTI CONTROL
% / fi
Use to control a variety of settings.
^*
Use to tune of radio broadcasting.
¶
MULTI CONTROL @ / #
Use to control a variety of settings.
^*
Use to select of preset radio stations.
•
ENTER
Use to control a variety of settings.
^*
Use to presetting of radio stations.
¶
7 ACTIVE EQ key
Use to switch the status of
ACTIVE EQ.
∞
8 VOLUME CONTROL knob
Use to adjust the receiver volume.
£
Display
Speaker selection indicators,
Input channel indicators (The Input channel
indicators lights up to indicate the channels
contained in the input signal. The "S" indicator
lights when the surround component consists
of a single channel.)
ACTIVE EQ indicator,
DUAL SOURCE Input indicator,
96 kHz fs indicator
Frequency display,
Input display, Preset
channel display,
Listen mode display
MUTE indicator
CLIP indicator
Input mode indicators
Listen mode indicators
Sleep timer indicator, TONE indicator,
AUTO indicator, ST. indicator,
TUNED indicator
For Europe and Australia:
RDS indicator, PTY indicator
Dolby Headphone mode indicator,
Dolby Virtual Speaker mode indicator
View when the GAME/ FRONT AUX jack
cover is open.
Main unit
Names and functions of parts
Standby mode
While the standby indicator is lit, a small
amount of power is supplied to the system to
back up the memory. This is called standby
mode. Under the condition, the system can
be turned ON by the remote control unit.
9 INPUT SELECTOR key
Use to select input sources. £
0 SETUP key
Use to select the speakers' settings
etc.
^*
Use to switch the status of
REC MODE.
§
! LISTEN MODE key
Use to select the listening mode.
›
@ GAME jacks $¡¢
# FRONT AUX jacks $¢
$ PHONES jack
Use for headphone listening. ¢