Filter
Top Products
17
EN
Let’s play DVD video software
1 Press the MULTI CONTROL @ / # to select "CUSTOM"
and press the ENTER to select each of the speaker
setup items.
2 Press the MULTI CONTROL @ / # to select the speaker
setup item.
Press the MULTI CONTROL % / fi to select the setting for
each item.
Subwoofer : "SUBW" ] "ON" or "OFF"
Front speakers : "FRNT" ] "LRG" or "NML"
Center speaker : "CNTR" ] "LRG", "NML" or "OFF"
Surround speakers : "SURR" ] "LRG", "NML" or "OFF"
Back Surround speakers : "BS" ] "LRG", "NML" or "OFF"
BS/SW Amp : "BS/SW" ] "BS", "SW" or "OFF"
Subwoofer re-mix setting : "REMIX" ] "ON" or "OFF"
"ON" : A subwoofer is connected.
Subwoofer re-mix setting mode to the receiver is ON.
"OFF" : No speaker is connected.
Subwoofer re-mix setting mode to the receiver is OFF.
"LRG" : Relatively large-size speakers.
"NML" : Normal-size speakers.
"BS" : A surround back speaker is connected to the SURR BACK/SW
terminals.
"SW":
A subwoofer is connected to the
SURR BACK/SW
terminals.
÷ When the subwoofer is set to "SUBW OFF", the front speaker
is set automatically to "FRNT LRG".
÷ Options "LRG" for the center speaker, surround speakers and back
surround speakers can be selected only when the front speakers
setting is "FRNT LRG". However, when the surround speaker setting
is "SURR NML", option "LRG" for the back surround speakers cannot
be selected.
If you use another speaker system want a setup
according to it:
Subwoofer : "SUBW" ] "ON"
Front speakers : "FRNT" ] "LRG"
Center speaker : "CNTR" ] "NML"
Surround speakers : "SURR" ] "NML
Back Surround speakers : "BS" ] "OFF"
BS/SW Amp : "BS/SW" ] "OFF"
Subwoofer re-mix setting : "REMIX" ] "ON"*
STEP 3 Play a disc on the DVD player.
1
Press the INPUT SELECTOR key to select "DVD".
2
Start playback of the DVD player.
For the operation, also refer to the instruction manual for your
DVD player.
÷ You can select various listen modes to enjoy surround
playback of various kinds of video software. ›
Example: 5.1 ch Surround System
3 After completing the setup, press the ENTER. If your
selection is correct, press the MULTI CONTROL % / fi to
select "OK" and press the ENTER .
Now the speaker setup is complete. (Select "CANCEL" to
return to the status before setup.)
÷ More detailed settings such as the volume level of each
speaker and distance to each speaker are also avail-
able. ) ~ ¡
If "REMIX ON" is selected as the subwoofer re-mix setting, the
low frequencies are enhanced by adding the low frequencies of
other channels to the subwoofer channel depending on the
speaker setup.
Subwoofer re-mix setting
Subwoofer : "SUBW" ] "ON"
Front speakers : "FRNT" ] "LRG"
Center speaker : "CNTR" ] "NML"
Surround speakers : "SURR" ] "NML"
Back Surround speakers : "BS" ] "NML"
BS/SW Amp : "
BS/SW
" ] "
BS
"
Subwoofer re-mix setting : "REMIX" ] "ON"*
Example: 6.1 ch Surround System
* When the subwoofer setting is "SUBW ON", front speakers
setting is "FRNT LRG" and a stereo source is played, the low
frequencies may be reproduced through the front speakers and no
audio output from the subwoofer in certain listen modes. In this
case, the low-frequency signal can be output from the subwoofer
by selecting "REMIX ON" for the subwoofer re-mix setting.
÷ When the speaker setting is set to "BS OFF", the DOLBY PRO
LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes cannot
be selected.
÷ Connect two surround back speakers (LB and RB) to the PRE
OUT SURROUND BACK jacks, see "PRE OUT jacks con-
nections". $
Subwoofer : "SUBW" ] "ON"
Front speakers : "FRNT" ] "LRG"
Center speaker : "CNTR" ] "NML"
Surround speakers : "SURR" ] "NML"
Back Surround speakers : "BS" ] "NML"
BS/SW Amp : "
BS/SW
" ] "
OFF
"
Subwoofer re-mix setting : "REMIX" ] "ON"*
Example: 7.1 ch Surround System