You can set the date formats of the calendar function.
Display and setting:
Select the display "Date Mode" during the selecting function in
the menu system.
Press the 4 and ¢ button to select the date format you
want to show in the display.
The sample of the date format for today is displayed.
2
1
Calendar Mode
Adjust the date for the unit so that you can use the calendar
function.
Display and setting:
Select the display "Date Adjust" during the selecting function in
the menu system.
Press either the 4 or ¢ button for at least one second to
enter the Calendar adjustment mode.
The date display will blink.
Selecting the item (day, month, or year) to adjust
Press the 4 or ¢ button.
The item blinking in the display can be adjusted.
Adjusting the date
Press the FM or AM button.
The item of the date blinking in the display will change.
Press the MENU button to end the Calendar Adjustment
mode.
5
4
3
2
1
Calendar Adjustment
Adjust the time manually.
(KDC-X917/X817 only)
This adjustment is available only when the automatic time
adjustment is set to off. (page 36)
Display and setting:
Select the display "Clock Adjust" during the selecting function
in the menu system.
Press either the 4 or ¢ button for at least one second to
enter the Manual time adjustment mode.
The time display will blink.
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
Press the MENU button to end the Manual Time Adjustment
mode.
Exiting the Manual Time Adjustment mode would start the
clock counting.
4
3
2
1
NOTE
Manual Time Adjustment
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Display and setting:
"Beep ON" : Beep setting is on. (Default setting)
"Beep OFF" : Beep setting is off.
The beep sound is not output from the preout jacks.
NOTE
Touch Sensor Tone
— 35 —
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 35