Filter
Top Products
You can register a station as a program type.
To register a non-RDS station as a program type:
Tune your radio to the non-RDS station that you want to
register as the program type.
Press the PTY button to enter the program type selection
mode.
Press the FM/AM button to select the program type you want
to register. Follow the instructions in 2 to enter the program
type selection mode.
Press the NAME button for at least two seconds.
The station will be registered as a program type, allowing it to
be the target of frequency seeks just as RDS stations are.
Press the PTY button to end the program type selection mode.
5
4
3
2
1
Registration of a station as a PTY
If no program can be found, "NO PTY" is displayed.
If you want to select another type of program, repeat steps 2 and
3 above.
Switching to Other Stations with the Same Type of Program:
When "PTY Found" is displayed, perform auto seek tuning.
The tuner scans for another station with the same type of
program.
Canceling Program Type Function During Its Operation:
Press the PTY button.
Confirming Program Type:
Press the DISP button.
The program type of the station currently tuned to will be
displayed for five seconds. During that time, "Entry" will blink in
the display.
If you tune to frequencies for which no program type has been
stored, "No Entry" will be displayed.
NOTE
NOTE
8. Soft Rock (Soft Rock)
9. Top 40 (Top 40)
10. Country (Country)
11. Oldies (Oldies)
12. Soft (Soft)
13. Nostalgia (Nostalgia)
14. Jazz (Jazz)
15. Classical (Classical)
16. R&B (Rhythm and Blues)
17. Soft R&B (Soft R & B)
18. Language (Foreign Language)
19. Religious Music (Religious Music)
20. Religious Talk (Religious Talk)
21. Personality (Personality)
22. Public (Public)
23. College (College)
24. Weather (Weather)
(Speech.....1~4, 18, 20~24, Music.....5~17, 19)
• You can select the type of program directly by pressing a
preset button. The buttons are factory-set to the following
type of programs:
1. Music 2. Speech 3. News
4. Sports 5. Classical 6. Jazz
Changing the Preset Button Settings for Program Type
After selecting the type of program to be stored in a certain
preset button, press that button for at least two seconds.
The previously stored data for that button are erased and the
new program type is stored.
Seeking the Selected Program Type
Press the 4 or ¢ button to make a seek of frequencies
with your selected type of program.
The display blinks and the seek starts.
If your selected type of program is found, the name or the
frequency of the station is displayed and the station is tuned
into.
"PTY Found" is displayed for about 30 seconds.
If you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
3
NOTE
— 25 —
KDC-X917(K)_U.S_r3 00.12.26 1:12 PM Page 25