Kenwood CD-RECEIVER CD Player User Manual


 
4/¢ buttons
Press the 4 button to search through the tracks backward.
Press the ¢ button to search through the tracks forward.
Use to move the cursor while entering disc name.
DISC buttons (for disc changers)
Press the DISC button to search through the discs backward.
Press the DISC+ button to search through the discs forward.
Select numbers and symbols while entering disc name.
38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
DNPP button (for disc changers)
Enters and cancels the Disc Name Preset Play mode.
CD/External disc control features
4/¢ (TUNE) buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
Use to move the cursor left or right during station name input.
AM/FM buttons
Press the AM button to select the AM band.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
During station name input, selects digits and symbols.
OK button
During station name input, stores the already input data in
memory and ends the input mode.
Pressing the OK button during the tuner mode results the
frequency part of the display blinking. In such cases, press the
button again. It returns to the original display.
38 button
Selects the type of characters at the time of entering the station
name.
NOTE
Tuner features
Basic Operations of remote
28
English
KDC-V7017_U.S r5 00.12.26 1:01 PM Page 28