Filter
Top Products
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Source tone memory
Each source (CD, FM, AM and disc changer) has its own memory
in which to store the bass, middle, and treble tone settings.
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Press the AUD button to end the control mode.
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
NOTE
4
Adjustment
mode
(Display)
Bass ("Bass")
Treble
("TRE"/"Treble")
Balance("Balance")
Fader ("Fader")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
Middle
("MID"/"Middle")
Middle decreased.
Middle increased.
4 button ¢ button
Operation of Audio control button
Front channel increased.
Rear channel increased.
Volume Offset
("VOL Offset"
/"V Offset")
The sound level of
each source increased.
The sound level of
each source decreased.
Right channel emphasized.
Left channel emphasized.
3
NOTE
Bass
Treble
Middle
Balance
Fader
Volume Offset
Adjust various parameters of sound quality.
Press the AUD button for at least one second to enter the
control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
2
1
Audio Control Setting
You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
As you proceed, each indicator would go on.
The System Q function changes the values of the following
sound quality parameters:
Bass center frequency, bass level, bass quality factor, bass
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Note that some of these parameters cannot be controlled by the
audio control setting feature.
Their setting values are different depending on the setting of the
speaker setting mode.
NOTE
Flat
Easy
Rock
Jazz
Pops
Top 40
Scan of Flat – Easy
(Default setting)
User memory*
*User memory:
The unit returns to the state
adjusted the last time with
the audio control setting feature.
System Q
General features
— 10 —
English
KDC-V7017_U.S r5 00.12.26 1:01 PM Page 10