Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display and setting:
"CRSC ON" : The CRSC is on. (Default setting)
"CRSC OFF" : The CRSC is off.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
NOTE
Clean Reception System Circuit (CRSC)
<In FM reception of Tuner mode>
You can set the interval during which the open control panel
cannot reverse to be hidden. During the period you have set,
the faceplate can be removed from the faceplate bracket.
Display and setting:
"Off Wait" : 0s / 3s (Default setting) / 5s / 10s / 15s / 20s / 25s
(s=seconds)
Time setting for removing the faceplate
You can dim the display.
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
NOTE
Dimmer
This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 0" – "Contrast 10"
The initial setting value is "5".
NOTE
Contrast Adjustment
When Situational Mode is off, the original color setting
resumes.
To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for at least two seconds to enter the
blue adjust mode.
The 4 and ¢ buttons are used to adjust the blue color
tones, respectively.
Press the #3 button to end the blue adjust mode.
To store the color setting in the memory:
(color preset memory)
After adjusting the illumi colors, press the #5 button for two
seconds to store the color setting in the memory.
Pressing the #5 button again recalls the stored colors from the
memory.
Blue Adjust mode setting can’t do memory
Press the MENU button to end the Variable Illumination Color
Setting mode.
7
NOTE
6
5
▼
Scan Mode
▼
SRC Mode
(Changing colors depending on the source being played)
▼
▼
Time Mode
(Color changes every six hours)
Situational Mode off
— 25 —
KDC-V7017_U.S r5 00.12.26 1:01 PM Page 25