Filter
Top Products
72
English Convenient Function English
In step 2 on page 70, select the timer number you
want to cancel, and then press .
Even when you cancel the playback timer, the set-
ting remains stored.
In step 2 on page 70, select the timer number you
want to activate, and press . Then turn off the
main unit.
In step 2 on page 70, press repeatedly. If you
want to quit checking the playback timer,press
.
Set the playback timer again from step 1 on page
70.
NOTE
• When you want to activate two or three playback
timers, leave a blank time of 2 or more minutes
between the ending time of the first playback timer
and the starting time of the second playback timer.
If the blank time is less than 2 minutes, the second
playback timer does not work.
• When the power plug is disconnected or the
power is interrupted, the playback timer settings
may be lost. If the settings are lost, set the clock
and playback timer again.
• When you operate the playback timer with a DVD
VIDEO, DVD AUDIO or VCD, sound and video
may not be played back automatically. A DVD
VIDEO, DVD AUDIO or VCD may contain a disc
menu that appears first when played back.
Sound or video will not come out before you
select the desired item to be played back on the
disc menu.
Auto Standby
If no sound is produced for 3 minutes when a
sound source other than the FM/AM radio is
selected, the main unit automatically turns off.
■When a sound source other than the FM/
AM radio is selected
Press .
While a disc, MD, or cassette tape is being
played back or recorded:
When playback or recording finishes, auto standby
starts the countdown (the "A. STANDBY" indicator
flashes). When no operation is carried out within 3
minutes, the main unit automatically turns off.
When you start playback or recording within 3 min-
utes, auto standby starts the countdown again
after playback or recording finishes.
When an operation other than playback and record-
ing finishes and no operation is carried out within 3
minutes, the main unit automatically turns off.
While you are listening to sound from other
equipment:
When no sound is produced, auto standby starts
the countdown (the "A. STANDBY" indicator
flashes). When no operation is carried out within 3
minutes, the main unit automatically turns off.
"A. STANDBY OFF" indicator starts to flash 20
seconds before the main unit is to turn off.
Press once again.
NOTE
• Leaving the volume at "0" is not the same as pro-
ducing no sound, and therefore does not start the
auto standby function.
For the locations of remote control
buttons, refer to page 68.
Canceling the playback timer
function
Activating the playback timer again
Confirming the playback timer
Changing the playback timer
"A. STANDBY" stands for "Auto Standby".
Auto standby indicator
Auto standby performance
Canceling auto standby
UX-QD70[UB].book Page 72 Wednesday, July 20, 2005 4:36 PM