Filter
Top Products
14
English Preparation English
CAUTION
• Connect the main unit directly with a TV (or a
monitor) without routing through a VCR. Otherwise
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system and is not a malfunction.)
Also, if the main unit is connected to a TV with a
built-in VCR, there may be picture distortion during
playback.
NOTE
• Before playing back the discs with video output,
you need to select the color system and the video
processing system. Refer to "Selecting the Color
System and the Video Processing System (SCAN
MODE)" ( Page 19).
• You need to set "MONITOR TYPE" in the "PIC-
TURE" menu correctly according to the aspect
ratio of your TV. ( page 40)
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
You can enjoy better quality pictures than when
using the S-video cord.
CAUTION
• Use one of either the S-video cord or the compo-
nent video cord. If both cords are used, pictures
may not be played back properly.
NOTE
• In order to enjoy pictures with the progressive
mode ( page 19), the TV is required to have
progressive video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
Connecting with a TV
TV
Supplied video cord
Main unit
Main unit
Connecting directly
TV
(or monitor)
VCR
When a Clearer Picture Is
Desired
Connecting by using the S-video cord
TV
Main unit
S-video cord
(not supplied)
Connect the ends of S-video cord making sure that each
end matches its compatible terminal.
Connecting by using the component
video cord
TV
Main unit
Component video cord
(not supplied)
UX-QD70[UB]-03.fm Page 14 Wednesday, August 17, 2005 4:59 PM