JVC UX-QD70W Stereo System User Manual


 
54
English Recording Sound English
1 Select a sound source.
2 Insert an MD for recording.
• Confirm the MDLP, "LP: " indicator and
group recording settings. ( pages 51
and 53)
• Close the write protect knob on the MD
( page 75).
3 Hold down on the main
unit for approximately 4 seconds
to display the track mark options.
4 While the track mark options are
displayed, press to
select a track mark option.
• Each time you press , the
display changes as follows.
5 Press on the main unit.
Example: Display while FM radio broadcast is
recorded
• When recording the sound from other equip-
ment, wait until "AUX MD" appears, and
then start playback of the connected equip-
ment. Recording automatically starts when
sound is input to the main unit.
You can also start recording by pressing
.
With this method, even when sound from
the connected equipment pauses for 30 or
more seconds, the main unit does not auto-
matically quit recording.
Press .
Press .
• Each time you press , the display
changes as follows.
For the locations of remote control
buttons, refer to page 51.
Sound source Operation
Radio
broadcast
Select the radio station whose broad-
cast you want to record
( page 20).
Cassette tape
playback
Insert a cassette tape for playback,
press , and then press
.
Press to select the reverse
mode when necessary.
Sound from
other equip-
ment (AUX/
AUX-DIGITAL)
Press repeatedly to select AUX
or AUX-DIGITAL, and prepare play-
back on the other equipment
( page 45).
: When no sound is produced for
3 or more seconds, a track mark
is automatically set. You can
also insert a track mark by
pressing on the remote
control.
: Each time you press on the
remote control during recording,
a track mark is set (factory
setting).
: Track marks are automatically
set in 5-minute intervals.
Quitting Recording
Changing the display in the display
window during recording
Recording sound source name
Recording MD track
number
Clock display
Recording sound source name
Remaining time for recording
Recording MD group
number
(When tracks have
not been recorded in
a group, " - -"
appears.)
UX-QD70[UB]-04.fm Page 54 Tuesday, August 30, 2005 4:02 PM