Filter
Top Products
Introduction
53
Recording Sound
(Continued)
Recording Sound to MDs
Press .
• Each time you press , the display
changes as follows.
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• You can record tracks having different MDLP
modes onto an MD.
• You cannot use monaural extended recording,
which enables you to record sound twice as long
as with standard stereo recording. However, you
can record a monaural source with the selected
MDLP mode.
CAUTION
• Do not bump or sway the main unit during MD
recording. Be especially careful while "WRITING" is
displayed. Such movement may interfere with MD
playback.
• You cannot play back tracks recorded in LP2 or
LP4 with audio equipment that is not compatible
with MDLP. If you attempt playback, "LP: "
appears in front of the track title, and no sound is
produced. When you play back tracks recorded
in LP2 or LP4 with audio equipment that is com-
patible with MDLP, "LP: " does not appear.
You can add or delete the "LP:" indicator.
( " 'LP: ' indicator setting" on the right)
While recording is being paused,
press
.
• Each time you press
, the display changes
as follows.
• You can record up to 254 tracks to an MD. If you try
to record 255 or more tracks, "DISC FULL" appears.
• When you use a partially-recorded MD, this
product searches for the blank portion and
records the new tracks to that portion.
Unlike cassette tape recording, you cannot
record over old tracks on an MD.
• Changing in sound volume and quality on this
product during recording does not affect the
recorded sound.
• Sound from a CD, VCD or SVCD is recorded as
digital signals to an MD. Sound from the other
sources are converted from analog signals to
digital signals during recording.
• When you record a disc, track marks are auto-
matically inserted between tracks. However,
track marks may not be inserted when a DVD
VIDEO or DVD AUDIO is recorded.
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is used to record
sound from other equipment (AUX). With this
function, sound signals from the sound source
are detected and recording starts automatically.
When sound from the sound source pauses for
30 or more seconds, recording stops automati-
cally. The blank time between the last recorded
track and the next recorded track is approxi-
mately 2 seconds.
Things You Should Know
about MD Recording
Changing the display in the display
window during recording
Clock display
Elapsed playing time
of the chapter or
track being recorded
Remaining MD recording time
Recording disc track number
Recording MD track
number
Recording MD group
number
(When tracks have not
been recorded in a
group, "- -" appears.)
Recording Sound from Radio,
Cassette Tape or Other
Equipment
"LP: " indicator setting
: For deleting "LP: " from the track
title.
: For adding "LP: " to the track title.
CD-R/CD-RW Recording
• When you record sound from a CD-R or CD-
RW onto an MD, pressing may dis-
play "SCMS CANNOT COPY" in the display
window, and digital recording may not be avail-
able.
In such a case, set the recording speed to nor-
mal, hold down for 4 or more sec-
onds. While "ANALOG REC?" is displayed,
press once again to select analog
recording.
UX-QD70[UB]-04.fm Page 53 Tuesday, August 30, 2005 4:02 PM