Filter
Top Products
84
English
The AV COMPU LINK control system allows you to use JVC’s TV
with simple operations.
To use AV COMPU LINK control system, you need to connect this
unit and a TV through the AV COMPU LINK terminals.
• You can connect to a TV that has AV COMPU LINK II, AV
COMPU LINK III or AV COMPU LINK EX terminals.
AV COMPU LINK connection
Connect a TV by using a video cord (see page 8) then also connect it
by using a cord with monaural mini-plugs (not supplied).
• You need to set “AV COMPU LINK MODE” correctly to use AV
COMPU LINK control system. (See page 79.)
Set the “AV COMPU LINK MODE” to
•“DVD1” when you connect this unit to the COMPONENT
VIDEO (or VIDEO-3) terminals on a TV using a component
video cord (not supplied).
•“DVD2” when you connect this unit to the VIDEO-1 terminals on
a TV using an S-video cord (not supplied).
•“DVD3” when you connect this unit to the VIDEO-2 terminals on
a TV using a composite video cord (supplied).
Available operations
You can use following functions by using AV COMPU LINK control
system.
One-touch DVD play
Simply start playing back the unit, the TV automatically turns on and
changes the input mode to the appropriate position so that you can
view the playback picture.
• The TV does not turn off automatically even if you turn off the
unit.
When the main power of the TV is turned off or the
power cord of the TV is unplugged
You cannot use the one-touch play.
Cord with monaural mini-plugs
(not supplied)
TV
Connection diagram
Component video cord (not supplied): Select “DVD1.”
S-video cord (not supplied):
Select “DVD2.”
Composite video cord (supplied):
Select “DVD3.”
Using AV COMPU LINK Control System
ANTENNA
RIGHT
LEFT
RIGHT
PCM/
STREAM
PCM
LEFT
SPEAKER
IMPEDANCE
4
Ω
~
16
Ω
SPEAKERS
AUDIO
VIDEO OUT
SELECT
NTSC
PAL
DVD OPTICAL
DIGITAL
OUT
OPTICAL
DIGITAL
IN
AV
COMPU LINK
VIDEO
OUT
S-VIDEOVIDEO
COMPONENT
P
R
P
B
Y
AV
COMPU LINK II
AV
COMPU LINK EX
AV
COMPU LINK
VIDEO
OUT
S-VIDEO VIDEO
COMPONENT
P
R
P
B
Y
EN83-92_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM84