Filter
Top Products
22
English
To check the programed contents
On the TV screen:
& Before or after playback
Press PLAY/FM MODE.
& During playback
Press 7.
The programed contents appear on the TV.
To erase the play mode screen, press PLAY/FM MODE again.
On the display:
Press cursor 5/∞ while Program Play is
stopped.
• ∞: Shows the programed tracks in the
programed order.
• 5: Shows them in the reverse order.
To modify the program
You can modify the program before or after playing.
To erase the last step, press CANCEL.
• Each time you press CANCEL, the last programed
step is erased.
To add steps in the program before play, simply select the
numbers you want to add by pressing the number buttons.
To erase the entire program, press 7 before or after playback.
• Turning off the unit will also erase the program.
• During Program Play
You cannot select disc by using DISC UP or DISC DOWN (or DISC
SELECT on the unit).
• If you try to program the 100th step
“MEMORY FULL” will appear on the display.
• If your entry is ignored
You are trying to program a track from an empty tray, or a chapter/title/
track/group number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks). Such entries are ignored, and
are erased from the program.
• If the total playing time is 100 minutes or more
The total playing time on the display will not be shown. “– – : – –” will
appear.
USE NUMERIC KEYS TO PROGRAM TRACKS.
USE CANCEL TO DELETE THE PROGRAM.
PROGRAM
No Disc Group/Title Track/Chapter
1 3
5
2
1
5
5
8
2
1
6
12
7
2
3
4
5
6
7
8
9
10
To exit from Program Play
Before or after play, press PLAY/FM MODE once or twice so that
the unit enters another play mode (Random Play or Continuous
Play).
The PRGM indicator goes off.
• Turning off the unit also cancels Program Play and changes play
mode to Continuous Play. The program you have made will be
erased (see the left column).
Playing at Random—Random Play
The tracks of all loaded discs will be played at random.
• Random Play cannot be used on some DVDs.
• If a JPEG disc is loaded, it is not played back during Random
Play.
• To use Repeat Play (see page 23) with Random Play, press
REPEAT after starting Random Play.
1
Load discs into the 5-DVD changer.
• If the current playing source is not “DISC,” press DVD 3 (or
#¥8 DVD on the unit), then 7 before going to the next step.
On the remote control ONLY:
2
Press PLAY/FM MODE repeatedly
until “RANDOM” appears on the
display.
The RANDOM indicator also lights up on the display.
• Each time you press the button, the play mode changes as
follows:
3
Press DVD 3.
The tracks are played at random.
Random Play ends when all the tracks are played once (when
Repeat Play is not activated).
To stop during play, press 7.
Playback stops, but Random Play is still activated.
To skip the current playing track, press ¢.
• You cannot go back to the previous tracks.
RANDOM indicator
1 2 3 4 5
RANDOM
PROGRAM
(Program Play)
RANDOM
(Random Play)
OFF
(Continuous Play)
(On the remote control) (On the unit)
7
(On the remote control) (On the unit)
7
EN15-23_UX-J99DVD[UB]5.p65 03.12.12, 11:02 PM22