Filter
Top Products
67
English
6
Repeat steps
4
and
5
to select all the tracks you
want to erase.
• You can select up to 15 tracks.
7
Press ENTER.
8
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING” also
flashes while editing you have made is being recorded
on the MD.
Erasing All Tracks—ALL ERASE
This function allows you to erase all the tracks on an MD.
You cannot resume the erased tracks.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE EDIT repeatedly until
“ALL ERASE?” appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• To cancel the setting, press CANCEL.
4
Press ENTER.
“EDITING” appears and the REC (MD recording)
indicator flashes on the display. Then “WRITING” also
flashes while editing you have made is being recorded
on the MD.
“BLANK DISC” appears on the display.
Erasing Tracks—ERASE
This function allows you to erase unwanted tracks.
You cannot resume the erased tracks.
Once tracks are erased, the other tracks and/or groups are
renumbered.
You can erase up to 15 tracks at a time.
• To stop any time during the editing process below before step
8
,
press TITLE EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE EDIT repeatedly until
“ERASE?” appears on the display.
• If the loaded MD has no track, “ERASE?” will not appear.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
4
Press UP ¢ or DOWN 4 to
select the track you want to erase.
• You can also select the track using the number buttons. In this
case, the selected track starts playing repeatedly.
5
Press SET.
“ ” appears on the display.
The track marked with “
” will be erased.
• When you do not want to erase the track, press CANCEL to
remove “ .”
Ex.: When track 5 is selected.
Editing an MD (Continued)
EN63-70_UX-J99DVD[UB]5.p65 03.12.12, 11:06 PM67