JVC SP-THC60C Home Theater System User Manual


 
Advanced operations [ See page 23 for buttonlocations. I
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by
specifying the beginning (point A) and
ending (point B).
During playback
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
Press Cursor I_/_1 to highlight
Press ENTER.
4
5
Press Cursor •/A repeatedly to select
"A-B".
Press ENTER at the beginning of the
part you want to repeat (point A).
The repeat mode indicator "_,- A- "appears on the display
windouc
6 Press ENTER at the end of the partyou
want to repeat (point B).
The repeat mode indicator on the display window changes to
"_-_ A - B" and A-B Repeat Playback starts.
7 Press ON SCREEN•
The on-screen bar disappears.
To cancel
Select "OFF" in step 4, then press ENTER.
NOTE
When playing back aDVD VIDEO, A-B Repeat Playback is possible
only within the same title.
When playing back aVCD, 8VCD, or CD, A-B Repeat Playback is
possible only within the same track.
"A B" cannot be selected during Program and Random Playback.
"A B" cannot be selected during playback with PBC function.
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
While the system isturned oft"
DISC 1
IMPORTANT
Before using the remote control for the l\dlowing
operation;
Set the remote control mode selector to AUDIO.
NOTE
Before you start operation; There is a time limit wl_en
AUDIO _
doing the ibllowing steps. If the setting is canceled before you finish,
start fl'om step 1again.
7 Press SETTING•
Example:
BAL. CNTR
2 Press Cursor •/A to select the item
you want to set.
BAL. (Balance):
You can adjust the balance of the sound between "R (right)
21" and "L (left) 21'_To set the balance to normal, select
"CNTR (center)".
• MON. (Monitor Out):
Select the video output jack type by which you watch DVD
playback after connecting your TV. (See page 12.) Set the
video output to use A\ COMPU LINK remote control
system. (See page 38.)
VIDEO: To watch DVD playback via the VIDEO jack.
S: To watch DVD playback via the S-VIDEO jack.
COMP (Component):
T r
To watch D\ D playback xia the COMPONENT
VIDEO OUT jacks.
HDMh To watch DVD playback via the HDMI
MONITOR OUT terminal.
r T
hen selecting this setting, A\ COMPU LINK
remote control system does not work.
3 Press Cursor I_/_1 to make an
adjustment or selection•
Example:
BAL. L -I 1
\ i
The adjustment is set and the display atttomatically disappears
a few seconds later.
Pressand hold
"LOCKED" appears on the display window.
If you try to eject the disc, "LOCKED" appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
"UNLOCKED" appears on the display window.
32