JVC SP-THC60C Home Theater System User Manual


 
Advanced operations [ See page 23 for buttonlocations. I
Changing the VFPsetting
The VFP (Video Fine Processor) function
enables you to adjust the picture character
according to the type of progranaming,
picture tone or personal preference.
During playback
I Press VFP.
The current VFP settings appear on the TV screen.
Example:
While stopped
1 Press PLAYMODE
repeatedly until program
window appears on the TV screen•
PRG indicator lights on the display window.
2 Press Cursor I_/_1 repeatedly to
select
the VFP mode.
NORMAL: Normally select this.
CINEMA: Suitable lbr movies.
When you select "NORMAL" or "CINEMA", press VFP to
complete the setting.
USER 1and USER 2: Yuu can adjust parameters that affect
picture appearance.
Only when selecting "USER 1" or "USER 2" in step 2, proceed
to perform the following operation;
3 Press Cursor V/A repeatedly to select
a parameter you want to adjust.
Adjust gradually and confirm picture appearance results are as
preferred.
GAMMA:
Controls brightness of neutral tints while maintaining
brightness of dark and bright portions.
BRIGHTNESS:
Controls screen brightness.
CONTRAST:
Controls screen contrast.
SATURATION:
Controls screen color depth.
TINT:
Controls screen tint.
SHARPNESS:
Controls screen sharpness.
4 Press ENTER.
Example:
5 Press Cursor VIA to change the
setting•
6 Press ENTER•
The current VFP settings appear again.
7 Repeat steps 3 to 6 to adjust other
parameters•
8 Press VFP.
NOTE
Althougla the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
2 Follow the instructions that appear on
the TV screen to program the desired
chapters/tracks.
For details on using the number buttons, see "How to use the
number buttons". (See page 22.)
The content's numbers that you have to specify for
progrmnming varies depending on the disc/file type
DVD VIDEO: Titles and chapters
- VCD, SVCD, CD: Tracks
MP3, WMA: Groups and tracks
You can specify the chapters/tracks whose number is up to
99.
There may be a case that the group or title number can be
entered even for discs that contain no groups or titles. In such
a case, press ENTER to proceed to the Track/Chapter column.
%then you press ENTER instead of the munber buttons in the
Track/Chapter cohmm, "ALL" appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
To clear the programs one by one from the last entered
number
Press CANCEL repeatedly.
To clear all programs
Press l.
You can also clear the program by turning oft"the system.
3 Press I_ (play button).
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
To check the program contents
During playback, press II. Playback stops and the program window
appears.
To quit the Program mode
While stopped, press PLAY MODE repeatedly until both program
window and {_ disappear from the TV screen.
NOTE
When the source is USB MEMORY, Program Playback does not
work.
The Resume function cannot be used with Program Playback.
DISC (1-5) on the remote control and DISC (1-5) I_ on the center unit
do not work during Program Playback.
Program Playback may not work ior some discs.
3O