Filter
Top Products
Advanced operations [ See page 23 for buttonlocations. I
When Resume Playback is set to "ON" (see page
35) and you stop playback by the following
operations, the position where playback has been
stopped is stored. (RESUME indicator lights on
the display window.)
• Turning off the power (See page 16.)
• Pressing • once
• Changing the source (Seepage 17.)
To start playback from the stored position
Press _- (play button) or DVD.
• There may be a case when P,-(play button) does not work after
changing the source. In this case, select DVD as a source.
• Pressing DISC(1-5) (with SHIFTpressed) on the remote control or
DISC (1-5) _- on the center unit also resumes disc playback.
To clear the stored position
Press • again.
• Opening the disc tray with the playback disc also clears the stored
position.
NOTE
• This ftmctkm isnot awdlable when USBMEMORY isselected asthe
sonrce.
• (For DivX) The beginning of a scene where playback has been
stopped may be stored.
• During playback of a disc containing nmlti-view angles
When usingthe ANGLEbutton:
I Press ANGLE.
Example: The first view angle is selected out of 3 view angles
recorded.
2 Press ANGLE repeatedly, or press
Cursor VIA to select the desired view
angle•
When usingthe on-screen bar:
/ Press ON SCREEN twice•
The on-screen bar appears on the TV screen.
Press Cursor I_ 1< to highlight
Press ENTER.
• During playback of a disc/file containing
subtitles in several languages
When usingthe SUBTITLEbutton:
I Press SUBTITLE•
Example (DVD VIDEO): "ENGLISH" is selected out of 3
subtitle languages recorded.
2 Press Cursor VIA to select the desired
subtitle.
For SVCD
• An SVCD can contain up to four subtitles. Pressing SUBTITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
When usingthe on-screen bar:
/ Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor I_/< to highlight
3 Press ENTER.
4 Press Cursor VIA repeatedly to select
the desired subtitle•
5 Press ENTER.
6 Press ON SCREEN•
The on-screen bar disappears.
NOTE
• To clear the subtitle, press SUBTITLE.Each time you press SUBTITLE,
subtitle appears and disappears alternately.
• Some subtitle or audio languages are abbreviated in the pop-up
window. See "The language codes list". (See page 33.)
• For DivX, }_u cannot operate this procedure using the on-screen bar.
4 Press Cursor V/A to selectthe desired
view angle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
28