Filter
Top Products
23
Sub-Room Operations
This section explains only the operations used when you play any sound source in the sub-room.
See pages 17 for the main room operations.
STANDBY
POWER
SUB ROOM ON /OFF
Turning the Power On and Off (Standby)
and Selecting the Sub-room Operations
On the front panel:
1. Press POWER.
The STANDBY lamp on the front panel
goes off, and the MAIN ROOM indicator
lights up on the display. The name of the current main
room source (or station frequency) appears on the display.
The currently selected SPEAKERS 1 and/or 2 indicator(s)
light(s) up on the display.
2. Press SUB ROOM ON/OFF.
The SUB ROOM indicator lights up on the
display (and the SPEAKERS SUB ROOM indicator
lights up on the display if it has been activated).
• If the SPEAKERS SUB ROOM indicator is not lit on the
display, see also “Setting the Front Speakers Either for the
Main Room or Sub-room” on page 27, and “Activating the
Sub-room Front Speakers” on page 26.
3. Press SUB ROOM CONTROL.
The current source name for the sub-room
appears on the display.
Now the buttons and controls on the front panel work for the
sub-room operations.
• Each time you press the button, the buttons and controls on the
front panel alternate between for the main room and for the
sub-room.
To turn off the power (into standby mode),
press POWER again.
The STANDBY lamp lights red. A small
amount of power is consumed in standby
mode. To turn the power off completely, unplug the AC power cord.
“SUB” and the source name for the sub-room appear
Current source name and Surround/DSP modes for
the main room appear
IMPORTANT:
Check to see if the proper indicator(s) and information appear on the
display on the front panel before/while using the buttons and controls.
For the sub-room operations:
• The SUB ROOM indicator is lit.
• The source name for the sub-room is lit on the
display.
• When using the remote control:
–Set MAIN ROOM/SUB ROOM selector to
“SUB ROOM.”
–Check to see if the following information
appear on the display window on the remote control:
Buttons
FM/AM
CD
PHONO
TAPE/MD
DVD
CDR
USB AUDIO
TV/DBS
VCR 1
VCR 2
VIDEO
IndicationsMAIN ROOM/
SUB ROOM selector
MAIN ROOM
SUB ROOM
Indications
TUNER
CD
PHONO
TAPE
DVD
CDR
USB
TV**
VCR 1
VCR 2
VIDEO
Ex. When you press CD with
MAIN ROOM/SUB ROOM
selector set to “SUB ROOM.”
ON/OFF ON/OFF POWER POWER
STANDBY
TV/CATV/DBS
VCR1
ON
SUB ROOM
MAIN ROOM
SUB ROOM
MAIN ROOM
SUB ROOM
SUB ROOM CONTROL
Current volume level for the sub-room is shown here
STANDBY
POWER
Current volume level for the main room is shown here
ANALOG
VOLUME
MAIN ROOM
L R
SPEAKERS
1
SUB ROOMMAIN ROOM
PRO LOGIC
DGTL
ANALOG
AUTO DVD MULTI
DSP
HEADPHONE
DIGITAL EQ INPUT ATT
SLEEP VOLUME
ONE TOUCH OPERATION
3D–PHONIC MIDNIGHT MODE TA NEWS
MAIN ROOM
INFO
AUTO MUTING TUNED STEREO RDS EON
SUB ROOM
LINEAR PCM
DIGITAL
L
SUBWFR
LS RS
C R
S
SPEAKERS
2
SUB ROOM
LFE
1
1
SUB ROOM
MAIN ROOM
When you set MAIN ROOM/SUB ROOM selector* and press the
buttons listed above, the corresponding indication appears for 10
seconds for your confirmation.
Notes:
• You can only select the analog input as the sub-room source.
*
MAIN ROOM or SUB ROOM indicator does not appear when no
indicators appear on the display window.
**
When you set TV/CATV/DBS selector to “CATV/DBS,” “CATV”
appears as the indication. (See page 68.)
*
*
EN14-26.RX-9010VBK[J]f 01.2.15, 0:15 PM23