JVC RM-RXUV9RMD Stereo System User Manual


 
19
English
Use the Remote Control to carry out this function.
1. Insert an MD to be edited with its label side
up.
2. Press the MD
#8
button and then
7
button
to set the function to MD.
The track numbers and total playback time are displayed.
3. Press the EDIT/TITLE button until “DIVIDE ?”
is displayed.
The “EDIT” indicator appears on the display.
DIVIDE
=JOIN=MOVE=ERASE=ALL ERASE
=DISC TITLE=TITLE=(Back to the beginning)
4. Press the SET button.
The first track will be repeatedly played.
5. Select the track number to be divided.
The selected track is automatically played.
To select the track number, press the UP, DOWN, >, or < button.
UP button: Increases the track number by 1.
DOWN button: Decreases the track number by 1.
> button: Rapidly increases the track number.
< button: Rapidly decreases the track number.
Example: For track 3, press the UP button three times. For track
12, use the > button to rapidly increase the track
number (or simply press the UP button 12 times.)
6. Press the SET button at the point where
the track is to be divided.
The selected track is divided into two tracks and the track
number in the music calendar will increase by 1.
The recording lasting for 4 seconds starting where the track
was divided is repeatedly played for your reference.
Movement is possible within the POSITION-128 to 128 range
(about 8 seconds before or after the position). To move the
point, press the UP, DOWN, > or < button. The recording last-
ing for 4 seconds starting from the position to which the divid-
ing point has been moved is repeatedly played.
7. Press the SET button.
8. Press the EDIT/TITLE button.
The “EDIT” indicator disappears on the display.
9. Press the MD
0
button to complete editing.
The MD is ejected after “UTOCwriting” is displayed.
You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4
through 7 until the display returns to the original display before ed-
iting the track.
Note: While “UTOCwriting” is displayed, do not disconnect the
power cord or subject the Unit to the vibration to avoid in-
correct recording.
Dividing Tracks
(DIVIDE Function)
EDIT
/TITLE
SET
Playback time of the track
Track to be divided
SET
SET
Alternates