Filter
Top Products
15
English
To Select a Track or Passage within
a Track ——————————————
During playback, press the 4 or ¢ (< or >) button to select the
track you want.
The selected track starts playing.
• Press the
¢ button once to skip to the beginning of the
next track.
• Press the
4 button to skip to the beginning of the track be-
ing played. Press twice quickly to skip to the beginning of
the previous track.
• When the > or < button on the Remote Control is kept press-
ing, the track continuously skips.
Search Play ————————————
Holding down the 4 or ¢ button, during playback, will fast for-
ward/backwards the MD so you can quickly find a particular pas-
sage in the track you are listening to.
You can program the playing order of the tracks
using the Remote
Control
.
■ You can program up to 32 tracks in any desired order including
the same tracks.
■ You can only make a program when the MD Player is stopped.
■
1. Insert an MD.
■
2. Press the MD
#8
button.
■
3. Press the
7
button to stop the MD.
■
4. Press the PROGRAM button.
The System enters the programming mode and the “MD
PROGRAM” indicator lights up.
■
5. Press the UP, DOWN, >, or < button to
select the track to program.
UP button: Increases the track number by 1.
DOWN button: Decreases the track number by 1.
• When the > or < button on the Remote Control is kept press-
ing, the track continuously skips.
■
6. Press the SET button.
■
7. Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed tracks on
the display. Also, you can see the programmed tracks on the
music calendar.
■
8. Press the MD
#8
button.
The System plays the tracks in the order you have programmed
them.
■ You can skip to a particular program track by pressing the 4
or
¢ button during Program Play.
■ To stop playing, press the 7 button.
To confirm the programmed tracks while the MD Player is
stopped, each time press the
4 or ¢ button; the tracks making
up the program will successively be displayed in the programmed
order.
To delete all the tracks in the program, in stop mode, press
the 7 button. Pressing the MD 0 button to eject the MD will also
clear the programmed tracks.
To exit the program mode once, while the MD Player is
stopped, press the PROGRAM button to light off the “MD PRO-
GRAM” indicator.
• Even if the power is turned off, the programmed contents
remain in effect, through the Program mode is cleared.
Notes:
• You cannot program the track number that is not contained in
the MD.
• If the total playback time of the programmed tracks exceeds
150 minutes, the total playback time will go out on the display.
• If you try to program the 33rd track, “MEMORY FULL”
appears on the display for about 2 seconds.
To Modify the Program ———————
Modify the contents of the program while the MD Player is stopped.
Each time you press the CANCEL button, the last track in the pro-
gram is deleted. To add new tracks to the end of the program, repeat
above steps 5 to 7.
The tracks will play in no special order when you use this mode.
■
1. Press the RANDOM button on the Remote
Control.
The “MD RANDOM” indicator lights up on the display.
■
2. Press the MD
#8
button.
The tracks are played in random order.
To skip a track during playback, press the
¢ button to jump
to the next track in the random sequence. Press the
4 button to
jump back to the start of a track being played.
To exit Random Play mode, while the MD Player is stopped,
press the RANDOM button to light off the “MD RANDOM” indi-
cator and carry out Normal Play or press the MD
0 button to eject
the MD. You can also exit Random Play mode by turning off the
power.
You can set the program or individual track playing to repeat as
many times as you like.
Press the REPEAT button on the Remote Control.
The Repeat indicator changes with each press of the button, as
shown below.
= ALL= blank display = (back to the beginning)
: Repeats one track.
ALL : In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in the
program.
In Random Play mode, repeats all the tracks in ran-
dom order.
To exit Repeat mode, press the REPEAT button until the Repeat
indicator on the display goes out.
■ In Random Play, as a matter of course, cannot be selected.
■ Repeat mode remains in effect even when you change the play
mode.
Programming the
Playing Order of the Tracks
PROGRAM
DOWN
UP
SET
Program order number
Total playback time of the
programmed tracks
(After 2 seconds)
Random Play
Repeating Tracks