Filter
Top Products
15
Basic operations
When the time you specify elapses, the main unit
automatically turns off.
Press [SLEEP].
• Each time you press [SLEEP], the time indicated in
the display window changes. You can set the time
to 10, 20, 30, 60, 90, 120, 150 or 180 minutes.
Example: Display when the sleep timer is
set to 60 minutes
Press [SLEEP] repeatedly to select the
time again.
Press [SLEEP] once.
Press [SLEEP] repeatedly until
“SLEEP --” appears.
Turning off the main unit also cancels the sleep
timer.
■When the main unit is turned on
Press [DIMMER] repeatedly.
• Each time you press [DIMMER], the brightness
changes in 3 levels.
You can lock the disc tray to prevent the disc from
being ejected.
■When the main unit is turned off
Touch 0 while holding 7 on the main
unit for more than 2 seconds.
If you attempt to open the disc tray by pressing
0
while the main unit is turned on, the disc tray does
not open and “LOCKED” appears in the display
window.
To cancel the lock, do the same operation above
again while the main unit is turned off.
“UNLOCKED” is displayed in the display window.
Using the sleep timer
Changing the remaining time
Confirming the remaining time
Canceling the sleep timer
Changing the brightness of
the display window
Locking disc ejection
Setting the disc ejection lock
Basic operations (continued)
For the locations of the remote
control buttons, refer to page 12.
NX-F30[U].book Page 15 Tuesday, April 21, 2009 6:23 PM