Filter
Top Products
– 15 –
English
REPEAT
Repeating Tracks or CDs — Repeat Play
You can have all the CDs, the program or the individual track
currently playing repeat as many times as you like.
To repeat play, press REPEAT during or before
playing. To use Repeat play for Program play and
Random play, press the button after starting
playback.
• Each time you press the button, Repeat play mode changes
as follows, and the following indicator lights up on the
display:
: Repeats one track on one CD.
ALL: Repeats all the tracks on all the CDs
(continuously or at random), or all the tracks in
the program.
To cancel Repeat play, press REPEAT repeatedly until the
REPEAT indicator ( ALL, or ) goes off from the
display.
Prohibiting Disc Ejection — Tray Lock
You can prohibit CD ejection from the unit and can lock
discs.
• This operation is possible only when the unit is off (on
standby.)
• This operation is possible only using the buttons on the
unit.
To prohibit disc ejection, press 0 for CD 1 disc tray while
holding 7. (If there is any disc tray opened, close it first.)
“LOCKED” appears for a while, and the loaded CDs are
locked.
To cancel the prohibition and unlock the CDs, press 0 for
CD 1 disc tray while holding 7.
“UNLOCKED” appears for a while, and the loaded CDs are
unlocked.
If you try to eject CDs
“LOCKED” appears to inform you that the Tray Lock is in use.
Playing Video CDs and CD-Gs
You can play Video CDs either with or without the PBC
(PlayBack Control) function. But when the Repeat Play is
activated, you cannot play a Video CD with the PBC
function.
Before playing, set video output correctly according to your
TV system. Refer to “Connecting Other Equipment” on page
8.
1
Turn on the TV and select the video input so
that you can view the pictures from the unit.
• Refer also to the manual supplied with your TV.
2
Prepare the discs.
• Refer to “Loading CDs” on page 12.
When you play video CDs, “VIDEO CD” appears on the
display.
When you play CD-Gs, “GRAPHICS” appears on the
display.
3
Start playback of the discs.
You can play Video CDs by using same buttons for
playing audio CD both on the unit and on the Remote
Control.
• Refer to “Basic CD operations” on page 12.
To stop during play, press and hold 7.
To stop play and remove the disc, press 0 for the disc being
played.
Please make sure that the Video CDs to be played
is not flawed optically, as this may cause a
distorted sound or the unit to malfunction.
To adjust the color system — NTSC/PAL PAL AUTO
According to a Video CD or the color system used on your
TV, press NTSC/PAL PAL AUTO during play.
Each time you press the button, the following
appears on the display.
• Be sure to select either NTSC or PAL position when the picture
on the TV screen appears correctly.
About the color system
When wrong position selected, picture on TV screen will lose the
color and change into monochrome view.
NTSC/PAL PAL AUTO
ALL
NTSC PAL
PAL AUTO
MX-J270V[US,UX]12-20 EN/f 00.7.21, 11:34 AM15