Filter
Top Products
– 12 –
English
Playing Back CDs
Loading CDs
1
Press 0 for the disc tray (CD 1 to
CD 3) you want to load a CD onto.
The unit automatically turns on and the disc
tray comes out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same 0 you have pressed
in step 1.
The disc tray closes, and the corresponding
disc number indicator (CD 1 to CD 3) lights
up on the display.
4
Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
When you press 0 for the next tray you want to place another CD
onto, the first disc tray automatically closes and then the next tray
comes out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Playing Back the Entire Discs — Continuous
Play
You can play CDs continuously.
1
Load CDs.
2
Press one of the disc number
buttons (CD 1, CD 2, and CD 3)
on the unit or on the remote
control for the disc you want to
play.
CD play starts from the first track of the
selected disc.
• Pressing CD 6 instead of the disc number buttons
starts playing back if a CD is on the trays.
To stop during play, press 7 on the unit (or CD 7 on the
remote control.)
To remove the disc, press 0 for the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded in the disc trays, they are played in one of
the following sequences.
• When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)
• When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)
• When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press 0 corresponding to a CD, not playing or selected
currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not
stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD 6.
While pausing, the elapsed playing time flashes on the display.
To resume play, press CD 6 again.
Track number
Elapsed playing
time
CORRECT
INCORRECT
Disc marker
• The disc marker lights up for the disc number you have
selected.
• The disc indicator flashes while the corresponding CD is
being played.
• The disc indicator goes off when the unit has detected
that there is no CD on the corresponding disc tray.
Continued
A.BASS EX S.MODE
A.BASS EX S.MODE
CD
CD
CD
CD
SELECT
CD3CD2CD1
Disc indicator
Disc number
MX-J270V[US,UX]12-20 EN/f 00.7.21, 11:34 AM12