Filter
Top Products
– 8 –
English
Connecting Other Equipment
You can connect ordinary audio equipment as well as audio-
visual equipment. When connecting VCR, you can record
Video CDs program easily.
When you connect and use this equipment, refer also to its manual.
Be sure that the plugs of the audio- and video cords are color
coded: White plugs and jacks are for left audio signals, red
ones for right audio signals, and yellow one for video signal.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio-visual equipment
Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, the audio input jacks on the
other equipment and AUX OUT jacks on the rear, as well as
the video input jacks and the VIDEO OUT jack on the rear,
using an audio and/or video cords.
To a wall outlet
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your
area with the voltage selector on the rear of the unit.
• DO NOT plug in before setting the voltage
selector on the rear of the unit and all connection
procedures are complete.
Use a screwdriver to rotate the voltage selector so the voltage
number the voltage mark is pointing at is the same as the
voltage where you are plugging in the unit.
NOW, you can plug in the unit and other
connected equipment FINALLY!
Voltage mark
RIGHT
LEFT
6~16
OHMS
LINE VOLTS
110V
127V
220V
230V
-240V
VIDEO
OUT
LINE VOLTS
110V
127V
220V
230V
-240V
AUX
IN
RIGHT
LEFT
RIGHT
LEFT
ANTENNA
FM
AM LOOP
FM
75
GND
GND
AM
EXT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
LINE VOLTS
110V
127V
220V
230V
-240V
VIDEO
OUT
SPEAKERS
AUX
OUT
To Audio
Output
To Video
Input
To Audio Input
AUX
IN
RIGHT
LEFT
RIGHT
LEFT
ANTENNA
FM
AM LOOP
FM
75
GND
GND
AM
EXT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
LINE VOLTS
110V
127V
220V
230V
-240V
VIDEO
OUT
SPEAKERS
AUX
OUT
TV
Audio equipment
MX-J270V[US,UX]01-11 EN/f 00.7.21, 11:32 AM8