Filter
Top Products
8
ENGLISH
Turning on the power
1
Turn on the power and select the
source.
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows:
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you cannot
select CD as the source to play.
*** When “LINE IN” or “AUX IN” is set to
“OFF,” you cannot select it as the source to
play. (See page 39).
To operate the tuner (FM or AM—MW/LW),
see pages 10 – 20.
To play a CD,
see pages 21 – 24.
To play an MP3 disc (only for KD-SH909R),
see pages 27 – 32.
To operate external components – AUX INPUT
(AUX) and LINE INPUT (LINE),
see pages 44 and 45.
To operate the CD changer,
see pages 46 – 48.
To operate the DAB tuner,
see pages 49 – 52.
2
Adjust the volume.
Note:
After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See pages 33 – 35.)
• You can adjust and store the input level of
each source except for FM (see page 33).
To drop the volume in a moment
Press and hold ATT while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To increase the volume.
BASIC OPERATIONS
To decrease the volume.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 9.
Volume level indicator
Volume level appears.
AM TUNER (AM)
FM TUNER (FM)
DAB TUNER (DAB)*
LINE INPUT (LINE)***
CD CHANGER (CDCH)*
CD**
AUX INPUT (AUX)***
Back to the beginning
EN08_09SH909_707R[E]f.pm5 1/23/02, 11:22 AM8