Filter
Top Products
ENGLISH
51
Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB 1, DAB 2 and DAB 3) manually.
1
Select the DAB tuner.
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as follows:
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you cannot
select CD as the source to play.
*** When “LINE IN” or “AUX IN” is set to
“OFF,” you cannot select it as the source to
play. (See page 39).
2
Select the DAB band (DAB 1, DAB 2
or DAB 3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Tune in to an ensemble you want.
(DAB 1)
(DAB 2)
(DAB 3)
D1
D2
D3
4
Select a service of the ensemble
you want.
1 Press M (mode).
2 Press and hold
¢ or 4
to select a service
you want.
5
Press and hold the number button
(in this example, 1) you want to
store the selected service into for
more than 2 seconds.
6
Repeat the above procedure to
store other DAB services into other
preset numbers.
Notes:
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
Within
5 Seconds
AM TUNER (AM)
FM TUNER (FM)
DAB TUNER (DAB)*
LINE INPUT (LINE)***
CD CHANGER (CDCH)*
CD**
AUX INPUT (AUX)***
Back to the beginning
“1” lights up for a while.
EN49_52SH909_707R[E]f.pm5 1/23/02, 11:39 AM51