Filter
Top Products
10
ENGLISH
RADIO BASIC OPERATIONS
To stop searching before a station is received,
press the same button you have pressed for
searching.
To tune in to FM stations only with strong signals
1 Press M (mode) to enter the functions mode
while listening to an FM broadcast.
2 Press LO (local) while still in the functions
mode, so that the LOCAL indicator lights up
on the display.
This function works only while searching FM
stations, including SSM preset.
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
(FM 1) (FM 2) (FM 3)
F 1 F 2 F 3
2
Start searching a station.
When a station is received, searching stops.
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select FM or AM (MW/LW).
1 Press SOURCE
repeatedly to select
FM or AM (MW/LW)
as the source.
2 If necessary, press B
(band) repeatedly to
select the FM band
number. Each time
you press the button,
the FM band changes
as follows:
Notes:
• This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
• While receiving an FM RDS station, PS name
(station name) appears on the upper line of the
main display.
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
Selected band appears.
EN10_13SH909_707R[E]f.pm5 1/23/02, 11:23 AM10