Filter
Top Products
38
ENGLISH
To set the clock display – CLOCK
You can set the clock to be shown on the display
when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
• ON: Clock display is turned on.
• OFF: Clock display is turned off.
To select the level meter – LEVEL/EQ
You can select the level display according to your
preference.
When shipped from the factory, this mode is set
to “EQ.”
• EQ: Equalizer pattern is displayed.
• LEVEL 1: Audio level meter appears.
• LEVEL 2: Peak level meter appears.
• LEVEL 3: Display illumination starts.
To select the dimmer mode – DIMMER
When you turn on the car head lights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• AUTO: Activates Auto Dimmer.
• OFF: Cancels Auto Dimmer.
• ON: Always dims the display.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting – TELEPHONE
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit. When
shipped from the factory, this mode is
deactivated.
• MUTING 1: Select this if this setting can
mute the sounds.
• MUTING 2: Select this if this setting can
mute the sounds.
• MUTING OFF: Cancels the telephone muting.
To turn the key-touch tone on or off
– BEEP SW
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch
tone is activated.
• ON: Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
To turn the power amplifier switch on or off
– P.AMP SW
You can switch off the built-in amplifier and send
the audio signals only to the external amplifier(s)
to get clear sounds and to prevent internal heat
buildup inside this unit.
When shipped from the factory, the power
amplifier switch is turned on so that the built-in
amplifier works.
• ON: Select this mode when not using
external amplifier(s).
• OFF: Select this mode when using
external amplifier(s).
EN36_43SH909_707R[E]f.pm5 1/23/02, 11:33 AM38