Filter
Top Products
ENGLISH
44
EXTERNAL COMPONENT OPERATIONS
Playing external components
You can connect two external components to this
unit.
Connect one to the LINE IN plugs on the rear,
and the other to the auxiliary input jack on the
control panel.
• To use the external component connected to
LINE IN plugs on the rear, set “LINE IN” to
“ON” (see page 39).
• To use the external component connected to
the auxiliary input jack on the control panel, set
“AUX IN” to “ON” (see page 39).
You can connect a JVC DVD player or VCR
to the LINE IN plugs.
You can operate a JVC DVD player or VCR
through this receiver using the number
buttons on the control panel.
When you operate the VCR, you have to
change the operation mode of the number
buttons from the DVD operation mode to the
VCR operation mode. (See “To select the
target component to operate through this
receiver – KEY SEL” on page 40.)
1
Select the external component—LINE
INPUT (LINE) or AUX INPUT (AUX).
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as follows:
* Without connecting the DAB tuner or CD
changer, you cannot select it as the source to
play.
** If a disc is not in the loading slot, you
cannot select CD as the source to play.
*** When “LINE IN” or “AUX IN” is set to
“OFF,” you cannot select it as the source to
play. (See page 39).
auxiliary input
MD player, etc.
AM TUNER (AM)
FM TUNER (FM)
DAB TUNER (DAB)*
LINE INPUT (LINE)***
CD CHANGER (CDCH)*
CD**
AUX INPUT (AUX)***
Back to the beginning
EN44_45SH909_707R[E]f.pm5 1/23/02, 11:36 AM44