Filter
Top Products
15
AUDIO
5
Activate Surround or DSP Mode
You can enjoy Dolby Pro Logic II mode and DSP modes.
Dolby Pro Logic II—Pro Logic II Movie and Pro
Logic II Music
To activate Pro Logic II modes
Press SURROUND.
The current Pro Logic II mode appears on the display
for a while.
• Each time you press the button, Pro Logic II mode
changes as follows:
• When Dolby Pro Logic II mode is activated, the
PRO LOGIC
II indicator lights up on the display.
– For in-depth information about Dolby Pro Logic II modes, see
“Creating Realistic Sound Fields” on pages 19 to 21.
DSP modes—CONCERT, STADIUM, HALL,
THEATER, LIVE HOUSE
To activate DSP modes
Press DSP.
The current DSP mode appears on the display for a
while.
• Each time you press the button, DSP mode changes as
follows:
– For in-depth information about DSP modes, see “Creating
Realistic Sound Fields” on pages 19 to 21.
Note:
Before activating the Surround or DSP mode, adjust the speaker
setting to bring out the best performance from this system.
For in-depth information about adjusting the speaker setting, see
“Setting Menu” on pages 55 and 56.
To turn off the power (into standby)
Press AUDIO (or STANDBY/ON on the front
panel) again.
The illumination lamp goes off and the STANDBY lamp
lights up.
• A small amount of power is consumed even in standby mode. To
turn the power off completely, unplug the AC power cord.
LIVE HOUSE
STADIUM
CONCERT
THEATERDSP OFF
HALL
DSP
SURROUND
PL II MUSIC PL II MOVIE
PL II OFF
Notes:
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you press the button repeatedly, the frequency changes step
by step.
EN10-18TH-A35[B].pm6 03.1.20, 11:26 AM15