Filter
Top Products
9
A
B
C
AC IN
SUBWOOFER
CENTER
SPEAKER
REAR
SPEAKERS
RIGHT LEFT
FRONT
SPEAKERS
RIGHT LEFT
ANALOG VIDEO OUT
COAXIAL
FM 75
AV
AM LOOP
AM
EXT
VIDEO
S-VIDEO
IN
L
R
OPTICAL
DIGITAL IN
AUX
A
N
T
E
N
N
A
TV
VIDEO OUT
AV
VIDEO
S-VIDEO
You can select one of three connection types—
A
,
B
, and
C
.
For using the composite video cord or S-video cord
• If your TV has S-video (Y/C-separation) jack, connect it using an
S-video cord (not supplied)
B
.
By using this jack, you can get a better picture quality than using
composite video cord connection
A
.
• When you use the S-video cord to connect the TV, you select
the video signal type correctly. See “Picture Menu” on page 54.
For using the SCART cable (
C
)
If you use the SCART cable to connect the TV, you select the video
signal type correctly. See “Picture Menu” on page 54.
Notes:
• Keep the power cord away from the connecting cords and the antenna cords. The power cord may cause noise or screen interference.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
Now, you can plug the power cord of the center unit into the AC outlet.
A
B
C
S-video cord (not supplied)
Video cord (supplied) SCART cable (not supplied)
TV connection
The S-video cord and the SCART cable are not supplied with this system.
Use the cords or cables supplied with the other component or purchase them at an electric appliance store.
• S-video (Y/C-separation) signal does not output from the AV
(SCART) connector.
If you want to use S-video (Y/C-separation) signal, connect the
TV using an S-video cord (not supplied)
B
.
• If you use the SCART cable to connect the TV, you can enjoy
the sound with TV speakers.
When you play back a DVD and select the speaker settings to
2.1 ch (see page 21), the front left and right, center, and rear
channel signals are down-mixed and then output from the AV
(SCART) connector.
Otherwise, the front left, right channel signals are output from the
AV (SCART) connector.
EN01-09TH-A35[B].pm6 03.2.13, 9:22 AM9