Filter
Top Products
28
ENGLISH
Activating the level meter
You can show the level meters on the display
while playing any source.
This unit is equipped with three level meter
patterns.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ (equalizer)
twice
.
The last selected level meter
appears on the display.
2
Select the level meter pattern you
want.
As you turn the control
dial, the level meters
change as follows:
Level Meter 1:
The audio level meter fluctuates vertically.
Level Meter 2:
The speaker on the display vibrates as input
audio level changes.
Level Meter 3:
The left and right audio level meters appear.
• If the small animation display is selected, only
one audio level meter can be shown.
Sound
modes
The list below shows the preset value settings for each sound mode (see also page 26).
Preset values
Low Mid High
C.Freq. Q (Width) Level C.Freq. Q (Width) Level C.Freq. Level
Flat 50 Hz Q1 +00 700 Hz Q1 +00 8 kHz +00
Hard Rock 80 Hz Q2 +03 700 Hz Q1 +00 8 kHz +02
R & B 80 Hz Q3 +03 2 kHz Q2 +01 12 kHz +03
Pop 120 Hz Q1 +02 2 kHz Q2 +01 12 kHz +02
Jazz 80 Hz Q1 +03 1 kHz Q1 +01 8 kHz +03
Dance Music
50 Hz Q2 +04 700 Hz Q1 –02 8 kHz +01
Country 50 Hz Q4 +02 700 Hz Q1 +00 12 kHz +02
Reggae 80 Hz Q1 +03 2 kHz Q2 +02 12 kHz +02
Classic 120 Hz Q1 +03 1 kHz Q1 +00 8 kHz +02
User 1 50 Hz Q1 +00 700 Hz Q1 +00 8 kHz +00
User 2 50 Hz Q1 +00 700 Hz Q1 +00 8 kHz +00
User 3 50 Hz Q1 +00 700 Hz Q1 +00 8 kHz +00
EQ
E
Level 1
Off
Level 2
Level 3
EN25-28LH2000[U]f.pm5 3/28/02, 14:2528