Filter
Top Products
26
ENGLISH
Selecting preset sound modes
(iEQ: i-equalizer)
You can select a preset sound mode suitable to
the music genre.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ (equalizer).
The last selected sound mode is
called up.
2
Select the sound mode you want.
As you turn the control
dial, the sound modes
change as follows:
Flat O Hard Rock O R&B*O Pop O
Jazz O Dance Music O Country O
Reggae O Classic O User 1 O User 2 O
User 3 O (back to the beginning)
* Rhythm and Blues
To cancel the sound mode, select “Flat” in step
2.
Note:
For details about the preset settings of each sound
mode, see page 28.
Ex.: If you have selected “Flat” previously
Storing your own sound
adjustments
You can adjust the sound modes to your preference
and store your own adjustments in memory
(User 1, User 2 and User 3).
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press EQ (equalizer).
2
Select the sound mode you want to
adjust.
3
Enter the sound adjustment mode.
The following sound mode
adjustment screen appears
on the display.
EQ
E
EQ
E
Ex.: If you have selected “R & B”
EN25-28LH2000[U]f.pm5 3/28/02, 14:2526