Filter
Top Products
27
ENGLISH
6
Select one of the user sound modes
(User 1, User 2, User 3).
7
Store the adjustment in the selected
user sound mode.
4
Make adjustments as you like,
referring to the table “Sound
adjustment items.”
1) Press ¢ or 4 to select
the frequency band—Low, Mid,
or High.
2) Turn the control dial to select the
center frequency for the selected
band.
3) Press 5 or ∞ to adjust the level
of the selected band.
4) Press SEL (select) to enter the Q
level (band width) adjustment
mode for the selected band.
5) Turn the control dial to adjust the
Q level for the selected band.
6) Repeat steps 1) to 5) to adjust
the other frequency bands.
5
Exit from the sound adjustment mode.
The confirmation message
appears—whether you want to
store the adjustment.
If you want to cancel the adjustments,
press any button other than SEL (select).
Buttons used for adjustments
Selectable values
Low Mid High
50 Hz 700 Hz 8 kHz
80 Hz 1 kHz 12 kHz
120 Hz 2 kHz
Q1 (min.) Q1 (min.)
| | (Fixed)
Q4 (max.) Q2 (max.)
–06 (min.) –06 (min.) –06 (min.)
|||
+06 (max.) +06 (max.) +06 (max.)
Q
(band width)
Level
Center
frequency
Band
Sound adjustment items
Ex.:When you have selected “User 1”
EQ
E
EN25-28LH2000[U]f.pm5 3/28/02, 14:2527