JVC CA-V888T Stereo System User Manual


 
41
English
LVT0024-001A
[ U, UF ]
5. Select the source you want to listen to.
To use the Tuner as the source:
1. Adjust the MULTI CONTROL stick left or right until “TUNER” blinks in the display.
2. Adjust the MULTI CONTROL stick up or down to select the preset channel you want to
listen to. (Possible only after presetting stations.)
3. Press the SET/DEMO button.
To use a CD as the source:
1. Adjust the MULTI CONTROL stick left or right until “- CD - - -” blinks in the display.
2. Adjust the MULTI CONTROL stick up or down to select the disc tray containing the CD
you want to play.
3. Press the SET/DEMO button.
If you press the SET button without selecting a disc, the last disc played by the CA-V888T
will be used.
4. Adjust the MULTI CONTROL stick up or down to the select the starting track of the CD.
You can only select up to 20 tracks.
5. Press the SET button.
If you press the SET/DEMO button without selecting a track, playback will start from the
first track on the CD.
To use a Cassette Deck as the source:
1. Adjust the MULTI CONTROL stick left or right until “TAPE” blinks in the display.
2. Press the SET/DEMO button.
To use another source:
Use this to select a radio station that has not been preset.
1. Adjust the MULTI CONTROL stick left or right until “- - - -” blinks in the display.
2. Press the SET/DEMO button.
The last source used is selected.
SOURCEDAILY
CH
SET
/
SET
/
SET
/
SOURCEDAILY
SOURCEDAILY
SOURCEDAILY
SOURCEDAILY
SOURCEDAILY
SET
/
SET
/
SOURCEDAILY
CH
MHz