Filter
Top Products
31
English
LVT0024-001A
[ U, UF ]
Using the Cassette Deck (Listening to a Tape)
DECK CONTROL buttons
Display
SLEEP CLOCK
SOURCE
ON OFF
ALL 1 CD
REPEAT
AUTO
SOUND
MODE
RANDOM
PROGRAM
TUNED
STEREO
DAILY
REC
1234
5678
9
10 11 12
1413 15 16
CH
VOL
MHz
kHz
SET
CD TUNER
: Tape Direction indicator
: Reverse Mode indicator
: DOLBY B NR indicator
Tape Direction Indicator on the Display
The Tape Direction indicator tells you which direction the selected
tape deck will use for playback.
During playback, the direction indicator blinks slowly.
During fast left or fast right, the indicator blinks quickly.
During Music Scan mode, the direction indicator alternates between
blinking slowly and quickly repeatedly.
When the CA-V888T is being used, the display shows other items as well.
However, we have only shown the items described in this section.
Cassette Deck control buttons
The Cassette Deck allows you to play, record and dub audio tapes.
❏ Most tapes are now recorded with the Dolby NR system, so first check which type of the Dolby
NR system has been used on the tape. Only Dolby B NR is incorporated into the CA-V888T.
❏ With Automatic Tape Detection, you can listen to type I or II tapes without changing any
settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration
may occur and these tapes easily jam in the pinch-rollers and the capstans.
DOLBY B NR
TAPE
DECK A/B
REVERSE MODE
00
00
0 Eject (Deck B)
00
00
0 Eject (Deck A)
8
ON SCREEN
V.INTRO
HIGHLIGT