JVC CA-NXF30 Stereo System User Manual


 
27
Basic operations of disc/file playback
When a disc is played back
Press .
NOTE
You cannot go back to the previous title and
original program (play list).
When a disc is paused
Press [ SLOW] or [SLOW ].
Each time you press [ SLOW] or [SLOW ],
the speed increases.
Press
8
to pause playback, and press [DVD
3
]
or
3
(playback) to return to normal playback.
NOTE
No sound is produced.
The picture motion in the reverse direction may
not be smooth.
For a VCD, SVCD or DVD VR, slow motion
playback can be used in the forward direction
only.
When a disc/file is played back
Press
4
or
x
repeatedly.
NOTE
You cannot skip to the previous track even by
pressing
4
during random playback. (Refer to
page 31.)
You can also select a title or group. (1) Slide the
remote control mode selector to [SHIFT], (2)
press [GROUP/TITLE], and then (3) use the
number buttons to enter the desired title or
group number while “_ _” is displayed in the
display window. At this time, for a DVD VR, the
“PG” or “PL” indicator lights up in the display
window.
When a disc/file is played back
Use the number buttons to select the
chapter number or track number.
NOTE
To cancel the PBC function for VCD/SVCD, refer
to page 22.
You can skip within a file at approximately 5 minute
intervals. This is useful especially when you want
to skip within a long file.
When a disc/file is played back
Press
2
or
3
(cursor).
Each time you press
2
or
3
(cursor), the
playback position skips to the beginning of the
previous or next interval. Each interval is
approximately 5 minutes.
NOTE
Intervals are automatically assigned from the
beginning of a file.
You can use this function only within the same
file.
Playing back from a position
10 seconds before
Slow motion playback
Skipping to the beginning of
a chapter/track/file
Selecting a chapter/track
using the number buttons
Skipping at approximately 5
minute intervals
(PBC off)
Basic operations of disc/file playback (continued)
NX-F30[U].book Page 27 Tuesday, April 21, 2009 6:23 PM