JVC CA-NXF30 Stereo System User Manual


 
Basic operations of disc/file playback
22
When a disc is played back
When a play list is played back, “PL” is displayed
instead of “PG”.
When a disc is stopped
When a play list is played back, “PL” is displayed
instead of “PG”.
When “RESUME” is displayed in the display
window, refer to page 26.
When a disc is played back
You can use the menu screen to control
playback of a PBC compatible disc.
To cancel the PBC function, follow the
instructions below.
- Specify the track number using the number
buttons when the disc is stopped.
- Specify the track number using
4
or
x
when the disc is stopped, and then press
[DVD
3
] or
3
(playback).
When the PBC function is canceled, the “PBC”
display disappears and the elapsed playback
time appears.
To restore the PBC function, press [TOP MENU/
PG] or [MENU/PL], or open the disc tray once.
Press [RETURN] to return to the upper layer
during PBC playback.
When a disc is stopped
(When the PBC function is activated)
When “RESUME” is displayed in the display
window, refer to page 26.
When a VCD is stopped, “VCD” is displayed as
shown above.
When an SVCD is stopped, “SVCD” is displayed
as the disc type.
DVD VR
Chapter number Elapsed playback time
[DISPLAY] is pressed.
Chapter numberOriginal program
number
Original program number
[DISPLAY] is pressed.
Disc type
VCD/SVCD
Track number Playback control
Total playback timeTotal number
of tracks
A few seconds
later
Playback control
[DISPLAY] is pressed.
Disc type Playback control
For the locations of the remote
control buttons, refer to page 19.
NX-F30[U].book Page 22 Tuesday, April 21, 2009 6:23 PM