Filter
Top Products
11
Connections
7 To connect the video components for the source of VIDEO 2
• You can get better picture quality in the order — HDMI > Component video > S-video > Composite video.
NOTE
• Unify the way of TV connection and that of video component’s (for example, connect a video component through S-VIDEO jack
when TV is connected through S-VIDEO jack). Otherwise, the signal from the component is not sent to the TV.
• The audio signal through the HDMI VIDEO 2 IN terminal is not reproduced on this system. The signal is reproduced on the TV
connected with HDMI MONITOR OUT terminal.
• Use an HDMI cable shorter than 5 m (15 ft).
• When you are playing HDCP (High-Bandwidth Digital Content Protection) content, the sound and picture may not be
transmitted to the speakers and TV for a few seconds at the beginning due to the confirmation process.
• If the component video output jacks of your video components of the BNC type, use a plug adapter (not supplied) to convert the
pin plugs to BNC plugs.
• When shipped from the factory, the source of “VIDEO 2” have been set for use with the AUDIO VIDEO 2 IN terminal for the
audio connection. If you connect the components with digital coaxial audio cord, change the audio input (VIDEO 2) setting to
“Digital.” (See page 31.)
• If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound
output through this system may be distorted.
Connecting the video components for the source of VIDEO 2
Center unit
To HDMI output
HDMI cord
(not supplied)
DVD recorder, DVD player,
satellite tuner, VCR
or game console
To component
video output
Component video cord
(not supplied)
or
S-video cord (not supplied)
To composite
video output
To S-video
output
Composite video cord
(supplied)
Align the
5 marks.
To analog
audio output
To digital coaxial
audio output
RCA pin plug cord
(not supplied)
Digital coaxial audio cord (not supplied)
Do not connect the power cord until all other connections have been made.
TH-L1[JC].book Page 11 Friday, March 16, 2007 10:22 AM